Buy Industry Security Equipment Quality Guaranteed

Fire detection camera

The fire detection camera is a special fire detector and an intelligent video fire monitoring system. The fire detection camera collects the fireworks information and analyzes and processes it. It does not need to touch or get close to smoke and flame, and the detection range is 60m, 80m and 100m. Fire image detectors can be installed in high temperature, toxic, explosive industrial environment. The fire image detector includes HD color infrared camera and AC/DC power module. The acquisition unit is composed of infrared CCD and color CCD, which is a dual-band fire image detector. It uses intelligent camera control technology and intelligent image processing technology, single equipment has the largest area of care, suitable for large Spaces such as stadiums, parking lots, tunnels and so on. Fire image detectors are not affected by lights, solar radiation, arc welding, high temperature gas and blackbody radiation. The fire detector has linkage alarm sound output and switch output, and CAN be linked with the fire alarm controller through the CAN bus. It has one alarm output, one RS485 communication port, and one RJ45 video port. Product size: 375mm*145mm*130mm Specification: Working voltage: DC24V Horizontal Angle of view: 42°(JT-TX-GA60), 22°(JT-TX-GA120) Vertical Angle of view: 32°(JT-TX-GA60) , 17°(JT-TX-GA120) Farthest detection range:60m(JT-TX-GA60) , 120m(JT-TX-GA120) Minimum flame size:0.060m*0.060m(JT-TX-GA60) , 0.030m*0.030m(JT-TX-GA120)

$695.00

Add to Cart

alarm accessory/flame-detector UV IR.jpg

IR UV Flame Detector Explosion-proof Fire Alarm

The KF715/UVIR2 point type infrared and ultraviolet flame detectors use a new type of photoelectric infrared sensor, combined with flame recognition algorithm and 32-bit high-performance processing chip, which can achieve fast flame detection and suppress false alarm sources. It can provide reliable and continuous protection in indoor or outdoor environments where multiple false alarm sources exist. The perfect algorithm best combines flame detection and false alarm capabilities; The detector is suitable for various fuels; Suitable for heavy industry applications; Low maintenance cost, easy to update and improve Optical Window White Gemstone (Al2O3) Shell material: Aluminum alloy Molding process: Die casting Coating process: surface electrostatic powder spraying, internal metal passivation treatment. Weight ≤ 1kg Explosion proof and protection: EXd Ⅱ CT6 Protection: IP66 Power supply: minimum 18VDC standard 24VDC maximum 30VDC Working current monitoring status ≤ 15mA, alarm status ≤ 35mA Preheating time: 60s after power on When flames are detected in the monitored area, the detector enters the fire alarm state; The fire alarm output relay is activated, and the red fire alarm indicator light is on; When abnormalities are detected in sensors, power supplies, etc., the detector enters a fault alarm state; Fault output relay action, yellow fault indicator light on; When a fire alarm and malfunction occur simultaneously, the fire alarm takes priority; Alarm threshold adjustable at levels 1-3 (set through electromagnetic rod) The number of green flashes per monitoring status indicates the alarm threshold Alarm delay adjustable from 0-30 seconds (factory set to 0 seconds) Combination mode of drift compensation sensor hardware compensation and intelligent software compensation Can effectively compensate for drift caused by temperature, environmental changes, and long-term operation of components Interference source suppression can effectively suppress the influence of non flame interference sources, such as sunlight (direct and reflected), commonly used artificial light sources, background radiation sources, hot moving objects, welding, etc Indicator light l monitoring status: green light flashing Fire alarm status: Red light constantly on Fault status: The yellow light is constantly on Output fire alarm relay, activated upon alarm, output contacts 3A@30VDC 3A@250VAC L Fault relay, activated in case of fault, output contact 3A@30VDC 3A@250VAC Serial communication interface environmental parameters Working temperature -40 ℃ -+70 ℃ (enhanced type) Working humidity ≤ 95% HR, no condensation Storage temperature -40 ℃ -+85 ℃ Setting and recording: The alarm parameters of the detector can be set through the serial communication port using a PC and dedicated software Alarm mode Alarm threshold Alarm delay time Professional operation and password authorization are required Easy setup: Use the magnet at hand to control the built-in reed switch and adjust the alarm sensitivity Record query uses PC and dedicated software, and the internal records of the detector can be queried through the serial communication port Factory settings: alarm threshold, delay time. Technical Specifications Spectral range 2.7~5 μ m Detection range (Distant) Combustion material (Fuel) Fire source size (Size) Details N-Heptane 0.3mx0.3m (1ft x 1ft.) 40m (131 fit.) Gasoline 0.3mx0.3m (1ft x 1ft.) 35m (114 fit.) Diesel 0.3m x 0.3m (1ft x 1ft.) 30m (98 fit.) Kerosene 0.3mx0.3m (1ft x 1ft.) 30m (98fit.) Alcohol 0.3mx0.3m (1ft x 1ft.) 25m (82 fit.) Paper 0.3mx0.3m (1ft x 1ft.) 25m (82 fit.) Response Time: N-heptane flame ≤ 3s Cone of view range: 100 ° Optical Integrity Testing Oi (Optical Integrity) √ Meet the international (GBs) GB15631 √ GB3836 √ Explosion proof rating Exd IIC T6 Gb Ex tD A21 IP66/IP67 T80℃ Dust proof and waterproof rating (IP Proof Level) IP66/IP67