All Products

FW6000 Intelligent Fire Alarm Control Panel (FACP) is the new-generation fire alarm control unit designed for application in small and medium projects. It is wall-mounted type and has the advantages of powerful function, high reliability and flexible configuration. The panel is equipped with a LCD monitor to display all the information on fire alarms, faults and various operations, which can be printed out by the built-in printer. FW6000 is a one-loop control panel with maximum 240 points, which can work together with all FW 3 series field devices. Features: 1. This FACP uses two-wire bus system to control up to 240 addressable devices. 2. Wall mount design makes it easy to use and operate. 3. The FACP is composed of a main control module, a driver board and a communication board. 4. This FACP is compatible with the complete range of the FW series fire alarm devices like intelligent detectors, manual call point, input module, I/O module etc. 5. This FACP adopts windows-based operation menus, which are convenient and easily understood. 6. All the system functions can be realized just by simple operation to select the corresponding numbers or move the cursor. 7. The fire alarm sent out by this FACP is not only visible & audible, it can also be displayed on the LCD screen and be printed out by the built-in printer simultaneously, meanwhile, it can be recorded in the history log as well. Specification: 1. Primary AC Power supply: 220VAC 50/60Hz 2. Main supply output voltage (VDC): 27VDC & 32VDC 3. Mainy supply output current: 2.5A at 27VDC and 3A at 32VDC 4. Minimum battery size: 2*12V required 4Ah 5. Battery charging voltage (VDC): 27VDC 6. Battery charging current: 700mA 7. COM-SG connector voltage output: 1Amp @ 24VDC 8. DC24V connector voltage output: 1Amp @ 24VDC 9. COM-SG End of Line resistor (Ohms): 10K 10. COM-HJ contacts capacity: 2Amp @ 24VDC 11. COM-HJ End of Line Resistor (Ohms):10K 12. Computer Interface: USB 13. Display: Graphical LCD 128*64 14. Operating Humidity Range: 10% to 93% relative humidity, Non-condensing. 15. Operating Temperature Range: -10C to 50C 16. FACP Dimension (L*W*D): 330mm*120mm*400mm 17. FACP Neight weight: 7.8kg

FW6000 Intelligent Fire Alarm Control Panel (FACP) is the new-generation fire alarm control unit designed for application in small and medium projects. It is wall-mounted type and has the advantages of powerful function, high reliability and flexible configuration. The panel is equipped with a LCD monitor to display all the information on fire alarms, faults and various operations, which can be printed out by the built-in printer. FW6000 is a one-loop control panel with maximum 240 points, which can work together with all FW 3 series field devices. Features: 1. This FACP uses two-wire bus system to control up to 240 addressable devices. 2. Wall mount design makes it easy to use and operate. 3. The FACP is composed of a main control module, a driver board and a communication board. 4. This FACP is compatible with the complete range of the FW series fire alarm devices like intelligent detectors, manual call point, input module, I/O module etc. 5. This FACP adopts windows-based operation menus, which are convenient and easily understood. 6. All the system functions can be realized just by simple operation to select the corresponding numbers or move the cursor. 7. The fire alarm sent out by this FACP is not only visible & audible, it can also be displayed on the LCD screen and be printed out by the built-in printer simultaneously, meanwhile, it can be recorded in the history log as well. Specification: 1. Primary AC Power supply: 220VAC 50/60Hz 2. Main supply output voltage (VDC): 27VDC & 32VDC 3. Mainy supply output current: 2.5A at 27VDC and 3A at 32VDC 4. Minimum battery size: 2*12V required 4Ah 5. Battery charging voltage (VDC): 27VDC 6. Battery charging current: 700mA 7. COM-SG connector voltage output: 1Amp @ 24VDC 8. DC24V connector voltage output: 1Amp @ 24VDC 9. COM-SG End of Line resistor (Ohms): 10K 10. COM-HJ contacts capacity: 2Amp @ 24VDC 11. COM-HJ End of Line Resistor (Ohms):10K 12. Computer Interface: USB 13. Display: Graphical LCD 128*64 14. Operating Humidity Range: 10% to 93% relative humidity, Non-condensing. 15. Operating Temperature Range: -10C to 50C 16. FACP Dimension (L*W*D): 330mm*120mm*400mm 17. FACP Neight weight: 7.8kg

FW6000 Intelligent Fire Alarm Control Panel (FACP) is the new-generation fire alarm control unit designed for application in small and medium projects. It is wall-mounted type and has the advantages of powerful function, high reliability and flexible configuration. The panel is equipped with a LCD monitor to display all the information on fire alarms, faults and various operations, which can be printed out by the built-in printer. FW6000 is a one-loop control panel with maximum 240 points, which can work together with all FW 3 series field devices. Features: 1. This FACP uses two-wire bus system to control up to 240 addressable devices. 2. Wall mount design makes it easy to use and operate. 3. The FACP is composed of a main control module, a driver board and a communication board. 4. This FACP is compatible with the complete range of the FW series fire alarm devices like intelligent detectors, manual call point, input module, I/O module etc. 5. This FACP adopts windows-based operation menus, which are convenient and easily understood. 6. All the system functions can be realized just by simple operation to select the corresponding numbers or move the cursor. 7. The fire alarm sent out by this FACP is not only visible & audible, it can also be displayed on the LCD screen and be printed out by the built-in printer simultaneously, meanwhile, it can be recorded in the history log as well. Specification: 1. Primary AC Power supply: 220VAC 50/60Hz 2. Main supply output voltage (VDC): 27VDC & 32VDC 3. Mainy supply output current: 2.5A at 27VDC and 3A at 32VDC 4. Minimum battery size: 2*12V required 4Ah 5. Battery charging voltage (VDC): 27VDC 6. Battery charging current: 700mA 7. COM-SG connector voltage output: 1Amp @ 24VDC 8. DC24V connector voltage output: 1Amp @ 24VDC 9. COM-SG End of Line resistor (Ohms): 10K 10. COM-HJ contacts capacity: 2Amp @ 24VDC 11. COM-HJ End of Line Resistor (Ohms):10K 12. Computer Interface: USB 13. Display: Graphical LCD 128*64 14. Operating Humidity Range: 10% to 93% relative humidity, Non-condensing. 15. Operating Temperature Range: -10C to 50C 16. FACP Dimension (L*W*D): 330mm*120mm*400mm 17. FACP Neight weight: 7.8kg

HB brand solar powered wireless perimeter break beam, solar power PIR, solar power fence grating system compatible wireless receiver center alarm panel and securty service equipment. HB-G250 has 8 wired zones and 992 wireless zones capacity. It is used for community security service with CMS software installed for PC windows operation and management. It has wired keypad for easy program detectors and zones. HB-G250 can equip with TCP/IP communication with RS485 interface and App monitor is available with it. Easy to build up security service center with HB-G250 alarm panel (refer to how to build up security service center at https://www.vedard.com/blog) with all types perimeter wireless security beams, detectors, indoor motion sensor, door contact, panic button, smoke detector, gas sensor, water leakage detector. Packing list: 1. PSTN alarm host X1 (ademco contact id protocol) 2.Wired alarm key panel X1 3. wireless remote X1 Product Introduction 1.8 wired and 992 wireless programmable defense areas. (Can work with same brand wireless detectors only) 2. Ademco Contact Id communication protocol. 3. 5 modes of defenses: departure defense, perimeter defense, single area defense, time delay defense, long distance defense. 4. 5 types of defense areas: instant defense area, time delay defense area, 24 hours defense area, perimeter defense and by-pass defense area. 5. 4 modes of disarming: password keyboard disarming, wireless remote control disarming, long distance disarming, alarm disarming. 6. Able to arrange defense, disarm the alarm, and emergency alarm by remote control. 7. Two sets of user passwords and one set of installation password. 8. Can prerecord 10-20s voice alarm. 9. It can dial 4 sets of telephone number (fixed or mobile phone number) and one set of alarm center number. 10. Parameter related to recording, monitoring, remote control, type of defense areas and telephone line inspection can be set as required through the key panel. It is tamper-resistant and lightening-proof. 11. With 110-220VAC power supply and 12V/7Ah backup battery. It can be accessed by a monitor head and at most 4 key panel. 12. Equipped with "watchdog" function so as to prevent the dead of halt of the system. low battery power alarm, non working alarm etc. 13. The receiving frequency is 443MHz.

HB brand solar powered wireless perimeter break beam, solar power PIR, solar power fence grating system compatible wireless receiver center alarm panel and securty service equipment. HB-G250 has 8 wired zones and 992 wireless zones capacity. It is used for community security service with CMS software installed for PC windows operation and management. It has wired keypad for easy program detectors and zones. HB-G250 can equip with TCP/IP communication with RS485 interface and App monitor is available with it. Easy to build up security service center with HB-G250 alarm panel (refer to how to build up security service center at https://www.vedard.com/blog) with all types perimeter wireless security beams, detectors, indoor motion sensor, door contact, panic button, smoke detector, gas sensor, water leakage detector. Packing list: 1. PSTN alarm host X1 (ademco contact id protocol) 2.Wired alarm key panel X1 3. wireless remote X1 Product Introduction 1.8 wired and 992 wireless programmable defense areas. (Can work with same brand wireless detectors only) 2. Ademco Contact Id communication protocol. 3. 5 modes of defenses: departure defense, perimeter defense, single area defense, time delay defense, long distance defense. 4. 5 types of defense areas: instant defense area, time delay defense area, 24 hours defense area, perimeter defense and by-pass defense area. 5. 4 modes of disarming: password keyboard disarming, wireless remote control disarming, long distance disarming, alarm disarming. 6. Able to arrange defense, disarm the alarm, and emergency alarm by remote control. 7. Two sets of user passwords and one set of installation password. 8. Can prerecord 10-20s voice alarm. 9. It can dial 4 sets of telephone number (fixed or mobile phone number) and one set of alarm center number. 10. Parameter related to recording, monitoring, remote control, type of defense areas and telephone line inspection can be set as required through the key panel. It is tamper-resistant and lightening-proof. 11. With 110-220VAC power supply and 12V/7Ah backup battery. It can be accessed by a monitor head and at most 4 key panel. 12. Equipped with "watchdog" function so as to prevent the dead of halt of the system. low battery power alarm, non working alarm etc. 13. The receiving frequency is 443MHz.

HB brand solar powered wireless perimeter break beam, solar power PIR, solar power fence grating system compatible wireless receiver center alarm panel and securty service equipment. HB-G250 has 8 wired zones and 992 wireless zones capacity. It is used for community security service with CMS software installed for PC windows operation and management. It has wired keypad for easy program detectors and zones. HB-G250 can equip with TCP/IP communication with RS485 interface and App monitor is available with it. Easy to build up security service center with HB-G250 alarm panel (refer to how to build up security service center at https://www.vedard.com/blog) with all types perimeter wireless security beams, detectors, indoor motion sensor, door contact, panic button, smoke detector, gas sensor, water leakage detector. Packing list: 1. PSTN alarm host X1 (ademco contact id protocol) 2.Wired alarm key panel X1 3. wireless remote X1 Product Introduction 1.8 wired and 992 wireless programmable defense areas. (Can work with same brand wireless detectors only) 2. Ademco Contact Id communication protocol. 3. 5 modes of defenses: departure defense, perimeter defense, single area defense, time delay defense, long distance defense. 4. 5 types of defense areas: instant defense area, time delay defense area, 24 hours defense area, perimeter defense and by-pass defense area. 5. 4 modes of disarming: password keyboard disarming, wireless remote control disarming, long distance disarming, alarm disarming. 6. Able to arrange defense, disarm the alarm, and emergency alarm by remote control. 7. Two sets of user passwords and one set of installation password. 8. Can prerecord 10-20s voice alarm. 9. It can dial 4 sets of telephone number (fixed or mobile phone number) and one set of alarm center number. 10. Parameter related to recording, monitoring, remote control, type of defense areas and telephone line inspection can be set as required through the key panel. It is tamper-resistant and lightening-proof. 11. With 110-220VAC power supply and 12V/7Ah backup battery. It can be accessed by a monitor head and at most 4 key panel. 12. Equipped with "watchdog" function so as to prevent the dead of halt of the system. low battery power alarm, non working alarm etc. 13. The receiving frequency is 443MHz.

Residual Current Transformer TC-DH01B-J325 Through-line aperture: 325 × 60mm main circuit rated operating current: less than 1000A Dimensions: 445mm × 220mm × 60mm Connected to the monitoring device JB-DH-TC5600 with a non-polar two buses, while achieving communication and power supply functions The address code is electronically encoded and can be written in advance by the electronic encoder. The engineering debugging is simple and reliable The microprocessor monitors the operation and transmits the status of the module to the monitoring device in both normal and alarm modes Wire system: non-polar connection to the signal bus of the monitoring device Residual current detector Specification: 1. Operating Voltage: Pulse voltage of circuit loop: Loop 24V Available range: 16V~30V 2. Operating current: Standby current≤0.4mA Alarming current≤0.7mA 3. Rated alarming current: 200mA～1000mA, step-size 1mA 4. Encoding mode: electrical addressable mode. It takes one site on the loop. And an addressable code could be any in the range of 1～255. 5. Cabling: connecting with the monitoring devices through signal nonpolar two-line loop. 6. Aperture of wires: 325mm×60mm 7. Rated operating current of main loop: less than 1000A. 8. Rated frequency of wires: 50Hz/60Hz 9. Ambient environment: Temperature: -10℃～+55℃ Relative humidity≤95%, non-condensing 10. Dimension: 445mm×220mm×60mm 11. Enclosure material: ABS plastic 12. Ingress Protection Rating: IP30 13. Weight: about 8kg

Residual Current Transformer TC-DH01B-J325 Through-line aperture: 325 × 60mm main circuit rated operating current: less than 1000A Dimensions: 445mm × 220mm × 60mm Connected to the monitoring device JB-DH-TC5600 with a non-polar two buses, while achieving communication and power supply functions The address code is electronically encoded and can be written in advance by the electronic encoder. The engineering debugging is simple and reliable The microprocessor monitors the operation and transmits the status of the module to the monitoring device in both normal and alarm modes Wire system: non-polar connection to the signal bus of the monitoring device Residual current detector Specification: 1. Operating Voltage: Pulse voltage of circuit loop: Loop 24V Available range: 16V~30V 2. Operating current: Standby current≤0.4mA Alarming current≤0.7mA 3. Rated alarming current: 200mA～1000mA, step-size 1mA 4. Encoding mode: electrical addressable mode. It takes one site on the loop. And an addressable code could be any in the range of 1～255. 5. Cabling: connecting with the monitoring devices through signal nonpolar two-line loop. 6. Aperture of wires: 325mm×60mm 7. Rated operating current of main loop: less than 1000A. 8. Rated frequency of wires: 50Hz/60Hz 9. Ambient environment: Temperature: -10℃～+55℃ Relative humidity≤95%, non-condensing 10. Dimension: 445mm×220mm×60mm 11. Enclosure material: ABS plastic 12. Ingress Protection Rating: IP30 13. Weight: about 8kg

Residual Current Transformer TC-DH01B-J325 Through-line aperture: 325 × 60mm main circuit rated operating current: less than 1000A Dimensions: 445mm × 220mm × 60mm Connected to the monitoring device JB-DH-TC5600 with a non-polar two buses, while achieving communication and power supply functions The address code is electronically encoded and can be written in advance by the electronic encoder. The engineering debugging is simple and reliable The microprocessor monitors the operation and transmits the status of the module to the monitoring device in both normal and alarm modes Wire system: non-polar connection to the signal bus of the monitoring device Residual current detector Specification: 1. Operating Voltage: Pulse voltage of circuit loop: Loop 24V Available range: 16V~30V 2. Operating current: Standby current≤0.4mA Alarming current≤0.7mA 3. Rated alarming current: 200mA～1000mA, step-size 1mA 4. Encoding mode: electrical addressable mode. It takes one site on the loop. And an addressable code could be any in the range of 1～255. 5. Cabling: connecting with the monitoring devices through signal nonpolar two-line loop. 6. Aperture of wires: 325mm×60mm 7. Rated operating current of main loop: less than 1000A. 8. Rated frequency of wires: 50Hz/60Hz 9. Ambient environment: Temperature: -10℃～+55℃ Relative humidity≤95%, non-condensing 10. Dimension: 445mm×220mm×60mm 11. Enclosure material: ABS plastic 12. Ingress Protection Rating: IP30 13. Weight: about 8kg

Outdoor security equipment solar power wireless infrared grating. The photoelectric grating works in pair with transmitter and receiver terminal as invisible light wall to block break-in through windows, fence, balcony. Easy installation with 3 steps: 1. Fix the terminal on wall. 2. Calibrate the transmitter and receiver beams via Laser pointer or by eye. 3. Tighten the screws. Package: 1 pair 4 beams solar power wireless infrared grating. 1 English user manual. 1 set fixing kits. Product feature: 1. Innovated design with solar power and RF & FSK wireless communication. 2. Strong interference resistance from sun light and any other types of infrared light with encryption technology. 3. More than 8 years of solar power battery life. 4. High grade security with self check and report of fault. 5. Work with same brand wireless alarm panel with app remote monitor and timer arm/disarm setting. Functions and Specification: 1.It is four beams wireless outdoor infrared grating working by pairs of transmitter and receiver. 2.Irradiation distance:10m 3.Wireless Transmitting distance: 100m 4.Wireless frequency:433MHz 5.Maximum alarm times in 24 hours:

Outdoor security equipment solar power wireless infrared grating. The photoelectric grating works in pair with transmitter and receiver terminal as invisible light wall to block break-in through windows, fence, balcony. Easy installation with 3 steps: 1. Fix the terminal on wall. 2. Calibrate the transmitter and receiver beams via Laser pointer or by eye. 3. Tighten the screws. Package: 1 pair 4 beams solar power wireless infrared grating. 1 English user manual. 1 set fixing kits. Product feature: 1. Innovated design with solar power and RF & FSK wireless communication. 2. Strong interference resistance from sun light and any other types of infrared light with encryption technology. 3. More than 8 years of solar power battery life. 4. High grade security with self check and report of fault. 5. Work with same brand wireless alarm panel with app remote monitor and timer arm/disarm setting. Functions and Specification: 1.It is four beams wireless outdoor infrared grating working by pairs of transmitter and receiver. 2.Irradiation distance:10m 3.Wireless Transmitting distance: 100m 4.Wireless frequency:433MHz 5.Maximum alarm times in 24 hours:

Outdoor security equipment solar power wireless infrared grating. The photoelectric grating works in pair with transmitter and receiver terminal as invisible light wall to block break-in through windows, fence, balcony. Easy installation with 3 steps: 1. Fix the terminal on wall. 2. Calibrate the transmitter and receiver beams via Laser pointer or by eye. 3. Tighten the screws. Package: 1 pair 4 beams solar power wireless infrared grating. 1 English user manual. 1 set fixing kits. Product feature: 1. Innovated design with solar power and RF & FSK wireless communication. 2. Strong interference resistance from sun light and any other types of infrared light with encryption technology. 3. More than 8 years of solar power battery life. 4. High grade security with self check and report of fault. 5. Work with same brand wireless alarm panel with app remote monitor and timer arm/disarm setting. Functions and Specification: 1.It is four beams wireless outdoor infrared grating working by pairs of transmitter and receiver. 2.Irradiation distance:10m 3.Wireless Transmitting distance: 100m 4.Wireless frequency:433MHz 5.Maximum alarm times in 24 hours:

Fire floor display and repeat panels have the following key features: 16 conventional repeater display zones. Fire alarm output relay and 1 fault output relay . Fire alarm output with 24VDC. RS485 can be able to connect the other panel. You can download the complete fire alarm system category and installation instruction manual fire alarm installation Specifications Power supply: 16VDC to 30VDC Current of power: Standby current: ≤15mA, Alarm current: ≤75mA Relay contact capacity: 2A@24VDC Buzzer level: 80dB@1m. Protection level: IP55 Communication mode:RS485 (Wires: RVSP type,1.0MM2 to 2.0MM2) Dimension of enclosure: 200mm(W)*91mm(H)*45mm(D) Material of enclosure:ABS, White Weight: 350g. Hole of enter wires: 1/2 inch(12mm) Repeater status indication and button operation FIRE ALARM Status: When a fire alarm occurs, the corresponding zone red LED flashing and the internal buzzer sounds. When “Silence” button pushed, the alarm zone LED lights steady and the buzzer silenced. When another new fire alarm occurs, the new zone red LED flash and the buzzer sound again. In the fire alarm status, the fire alarm “FIRE OUT” relay active and output “NO, NC, C” relay contacts and 24vdc power output. FAULT Status: When a fault event occurs, the corresponding zone’s yellow LED flashing and the internal buzzer sounds. When “Silence” button pushed, the fault zone LED lights steady and the buzzer silenced. When another new fault event occurs, the new zone yellow LED flash and the buzzer sound again. In the fault alarm status, the fault alarm “FAULT OUT” relay active and output “NO, NC, C” relay contacts. Normal status: When fire alarm panel’s fire or fault event restored, the fire alarm panel would send commands to let the repeater to the Normal Status. RUN LED: The “RUN” LED would keep light steady when the power supply in normal status. COMM. LED: The “COMM.” LED would flash once about three to five seconds in normal communication status. SILENCE LED: In the fire or fault alarm status, press the “Silence” button the “SILENCE” LED would turn on . TEST LAMP: In normal status, press “TEST” button would have a lamp test. SILENCE SOUND: In fire or fault status, press “SILENCE” button would silence the alarm sound. RESET: In the “SILENCE” status,press “RESET” button once the repeater would return to the Normal Status.

Fire floor display and repeat panels have the following key features: 16 conventional repeater display zones. Fire alarm output relay and 1 fault output relay . Fire alarm output with 24VDC. RS485 can be able to connect the other panel. You can download the complete fire alarm system category and installation instruction manual fire alarm installation Specifications Power supply: 16VDC to 30VDC Current of power: Standby current: ≤15mA, Alarm current: ≤75mA Relay contact capacity: 2A@24VDC Buzzer level: 80dB@1m. Protection level: IP55 Communication mode:RS485 (Wires: RVSP type,1.0MM2 to 2.0MM2) Dimension of enclosure: 200mm(W)*91mm(H)*45mm(D) Material of enclosure:ABS, White Weight: 350g. Hole of enter wires: 1/2 inch(12mm) Repeater status indication and button operation FIRE ALARM Status: When a fire alarm occurs, the corresponding zone red LED flashing and the internal buzzer sounds. When “Silence” button pushed, the alarm zone LED lights steady and the buzzer silenced. When another new fire alarm occurs, the new zone red LED flash and the buzzer sound again. In the fire alarm status, the fire alarm “FIRE OUT” relay active and output “NO, NC, C” relay contacts and 24vdc power output. FAULT Status: When a fault event occurs, the corresponding zone’s yellow LED flashing and the internal buzzer sounds. When “Silence” button pushed, the fault zone LED lights steady and the buzzer silenced. When another new fault event occurs, the new zone yellow LED flash and the buzzer sound again. In the fault alarm status, the fault alarm “FAULT OUT” relay active and output “NO, NC, C” relay contacts. Normal status: When fire alarm panel’s fire or fault event restored, the fire alarm panel would send commands to let the repeater to the Normal Status. RUN LED: The “RUN” LED would keep light steady when the power supply in normal status. COMM. LED: The “COMM.” LED would flash once about three to five seconds in normal communication status. SILENCE LED: In the fire or fault alarm status, press the “Silence” button the “SILENCE” LED would turn on . TEST LAMP: In normal status, press “TEST” button would have a lamp test. SILENCE SOUND: In fire or fault status, press “SILENCE” button would silence the alarm sound. RESET: In the “SILENCE” status,press “RESET” button once the repeater would return to the Normal Status.

Fire floor display and repeat panels have the following key features: 16 conventional repeater display zones. Fire alarm output relay and 1 fault output relay . Fire alarm output with 24VDC. RS485 can be able to connect the other panel. You can download the complete fire alarm system category and installation instruction manual fire alarm installation Specifications Power supply: 16VDC to 30VDC Current of power: Standby current: ≤15mA, Alarm current: ≤75mA Relay contact capacity: 2A@24VDC Buzzer level: 80dB@1m. Protection level: IP55 Communication mode:RS485 (Wires: RVSP type,1.0MM2 to 2.0MM2) Dimension of enclosure: 200mm(W)*91mm(H)*45mm(D) Material of enclosure:ABS, White Weight: 350g. Hole of enter wires: 1/2 inch(12mm) Repeater status indication and button operation FIRE ALARM Status: When a fire alarm occurs, the corresponding zone red LED flashing and the internal buzzer sounds. When “Silence” button pushed, the alarm zone LED lights steady and the buzzer silenced. When another new fire alarm occurs, the new zone red LED flash and the buzzer sound again. In the fire alarm status, the fire alarm “FIRE OUT” relay active and output “NO, NC, C” relay contacts and 24vdc power output. FAULT Status: When a fault event occurs, the corresponding zone’s yellow LED flashing and the internal buzzer sounds. When “Silence” button pushed, the fault zone LED lights steady and the buzzer silenced. When another new fault event occurs, the new zone yellow LED flash and the buzzer sound again. In the fault alarm status, the fault alarm “FAULT OUT” relay active and output “NO, NC, C” relay contacts. Normal status: When fire alarm panel’s fire or fault event restored, the fire alarm panel would send commands to let the repeater to the Normal Status. RUN LED: The “RUN” LED would keep light steady when the power supply in normal status. COMM. LED: The “COMM.” LED would flash once about three to five seconds in normal communication status. SILENCE LED: In the fire or fault alarm status, press the “Silence” button the “SILENCE” LED would turn on . TEST LAMP: In normal status, press “TEST” button would have a lamp test. SILENCE SOUND: In fire or fault status, press “SILENCE” button would silence the alarm sound. RESET: In the “SILENCE” status,press “RESET” button once the repeater would return to the Normal Status.

Small business fire security alarm system. CP-1002 Mini size designed conventional fire alarm 2 zone panel is used for family hotel fire security, restaurant fire security, store or shop fire security alarm. Automatic fire alarm system is a device that automatically detects, displays and sends out fire alarm when fire occurs to the protected object. It is widely used in modern factories, material warehouses, high-rise buildings, computing centers and other buildings, to ensure the safety of people's lives and property plays a huge role. The panel range is designed to meet the requirements of EN54 Parts 2 & 4. The panel can be used independently or connect by RS485. Automatic fire alarm system is composed of trigger device, fire alarm device, fire alarm device, power supply and linkage device with other auxiliary control function. Conventional 2-zone multi-wire fire alarm controller, equipped with any 2-wire smoke, temperature, alarm button and alarm bell, sound and light. At the same time can be equipped with security alarm equipment. More fire alarm systems with free technical support at fire alarm system Description: 1. The Mini fire alarm control master panel and slave panel each has 2 zones and each zone can equip Max.30 detectors and call points. 2. It should be installed, commissioned and maintained by suitably qualified service personnel with reference to IEE regulations and any statutory requirements. 3. The 2 zones alarm panel has 1 alarm sound output zones (bell zones), which can equip max.16 sounders for total max. 1A/24V power supplied. 4. The panel (master or slaver) has 24V auxiliary power output supply 2A/24V with fire 1, fire 2 relay output and fault relay output. 5. Enclosure supports two 12V, 4Ah backup batteries. 6. It supports detector head removal and easy for repair or maintenance. 7. It has Test/reset, silence alarm and Evacuate button for easy panel operation. 8. It has indicators of zone1 alarm /fault, zone2 alarm /fault, Sound alarm, and sound fault LED. That clearly showed detectors and sound circuit staturs. 9. There is one master fire alarm control panel and it can work with Max.31 same slaver panel. 10. The master fire control panel will communicate slaver panel one by one and fault will be showed if no response is received. 11. Alarm and fault events of panel No. and zone No. will be showed one by one on Master fire control panel. Specification: 1. System Power Supply: Primary AC 120VAC 50/60 Hz / 240VAC 50/60 Hz Power supply rating 2 Amps @ 24VDC Maximum Battery Charging Current 0.98 Amps @ 26VDC Initiating Device Circuits 2 Zones Alarm Zone 2 Normal Initiating Operating Voltage 23VDC, Maximum 26VDC, regulated 2. Standby current:

Small business fire security alarm system. CP-1002 Mini size designed conventional fire alarm 2 zone panel is used for family hotel fire security, restaurant fire security, store or shop fire security alarm. Automatic fire alarm system is a device that automatically detects, displays and sends out fire alarm when fire occurs to the protected object. It is widely used in modern factories, material warehouses, high-rise buildings, computing centers and other buildings, to ensure the safety of people's lives and property plays a huge role. The panel range is designed to meet the requirements of EN54 Parts 2 & 4. The panel can be used independently or connect by RS485. Automatic fire alarm system is composed of trigger device, fire alarm device, fire alarm device, power supply and linkage device with other auxiliary control function. Conventional 2-zone multi-wire fire alarm controller, equipped with any 2-wire smoke, temperature, alarm button and alarm bell, sound and light. At the same time can be equipped with security alarm equipment. More fire alarm systems with free technical support at fire alarm system Description: 1. The Mini fire alarm control master panel and slave panel each has 2 zones and each zone can equip Max.30 detectors and call points. 2. It should be installed, commissioned and maintained by suitably qualified service personnel with reference to IEE regulations and any statutory requirements. 3. The 2 zones alarm panel has 1 alarm sound output zones (bell zones), which can equip max.16 sounders for total max. 1A/24V power supplied. 4. The panel (master or slaver) has 24V auxiliary power output supply 2A/24V with fire 1, fire 2 relay output and fault relay output. 5. Enclosure supports two 12V, 4Ah backup batteries. 6. It supports detector head removal and easy for repair or maintenance. 7. It has Test/reset, silence alarm and Evacuate button for easy panel operation. 8. It has indicators of zone1 alarm /fault, zone2 alarm /fault, Sound alarm, and sound fault LED. That clearly showed detectors and sound circuit staturs. 9. There is one master fire alarm control panel and it can work with Max.31 same slaver panel. 10. The master fire control panel will communicate slaver panel one by one and fault will be showed if no response is received. 11. Alarm and fault events of panel No. and zone No. will be showed one by one on Master fire control panel. Specification: 1. System Power Supply: Primary AC 120VAC 50/60 Hz / 240VAC 50/60 Hz Power supply rating 2 Amps @ 24VDC Maximum Battery Charging Current 0.98 Amps @ 26VDC Initiating Device Circuits 2 Zones Alarm Zone 2 Normal Initiating Operating Voltage 23VDC, Maximum 26VDC, regulated 2. Standby current:

Small business fire security alarm system. CP-1002 Mini size designed conventional fire alarm 2 zone panel is used for family hotel fire security, restaurant fire security, store or shop fire security alarm. Automatic fire alarm system is a device that automatically detects, displays and sends out fire alarm when fire occurs to the protected object. It is widely used in modern factories, material warehouses, high-rise buildings, computing centers and other buildings, to ensure the safety of people's lives and property plays a huge role. The panel range is designed to meet the requirements of EN54 Parts 2 & 4. The panel can be used independently or connect by RS485. Automatic fire alarm system is composed of trigger device, fire alarm device, fire alarm device, power supply and linkage device with other auxiliary control function. Conventional 2-zone multi-wire fire alarm controller, equipped with any 2-wire smoke, temperature, alarm button and alarm bell, sound and light. At the same time can be equipped with security alarm equipment. More fire alarm systems with free technical support at fire alarm system Description: 1. The Mini fire alarm control master panel and slave panel each has 2 zones and each zone can equip Max.30 detectors and call points. 2. It should be installed, commissioned and maintained by suitably qualified service personnel with reference to IEE regulations and any statutory requirements. 3. The 2 zones alarm panel has 1 alarm sound output zones (bell zones), which can equip max.16 sounders for total max. 1A/24V power supplied. 4. The panel (master or slaver) has 24V auxiliary power output supply 2A/24V with fire 1, fire 2 relay output and fault relay output. 5. Enclosure supports two 12V, 4Ah backup batteries. 6. It supports detector head removal and easy for repair or maintenance. 7. It has Test/reset, silence alarm and Evacuate button for easy panel operation. 8. It has indicators of zone1 alarm /fault, zone2 alarm /fault, Sound alarm, and sound fault LED. That clearly showed detectors and sound circuit staturs. 9. There is one master fire alarm control panel and it can work with Max.31 same slaver panel. 10. The master fire control panel will communicate slaver panel one by one and fault will be showed if no response is received. 11. Alarm and fault events of panel No. and zone No. will be showed one by one on Master fire control panel. Specification: 1. System Power Supply: Primary AC 120VAC 50/60 Hz / 240VAC 50/60 Hz Power supply rating 2 Amps @ 24VDC Maximum Battery Charging Current 0.98 Amps @ 26VDC Initiating Device Circuits 2 Zones Alarm Zone 2 Normal Initiating Operating Voltage 23VDC, Maximum 26VDC, regulated 2. Standby current:

Intelligent Fire Alarm control panel LPCB fire controller 1 Loop 255points (it is also available for 2/3/4 loops). Color menu display Intelligent bus control mode; max 255 addressable points per loop, max 4 loops, max 48 zones Loop card type design:1-4 loop card can be seledted Glass fuse per loop Black box function Independent controlling password for the specially needed gas recharging units Self-design loop protocol Wall-mounted structure, compact and exquisite Akzo outer coating;anti-corrosion Language:English Approvals：LPCB（EN54-2/4） CE Core Functions 1. Fire Alarm Monitoring Detect fire signals from addressable smoke/heat detectors, manual call points, and other fire-sensing devices. Display the first/last fire alarm, zone location, device address, and time stamp in real time. Trigger fire alarm output (HJ+/HJ–) and sounder strobe for on-site audible-visual alert. Fault Detection & Indication Monitor system faults: main power fault, battery fault, loop communication fault, system fault. Monitor field device faults: detector fault, module fault, sounder strobe fault, FPE fault, zone fault. Output fault relay signal and show fault information on LCD and LED indicators. 2. Device & Zone Management Support up to 4 loops, max 255 addressable points per loop, total 1020 points. Support up to 48 zones with independent fire alarm and fault/disable indicators. Support device registration, query, definition (second code, type, attribute, location note). Support zone/addressable point/sounder/FPE disable and enable. Linkage Control Automatically start/stop FPE devices (I/O modules, fire dampers, fire pumps, etc.) via logic linkage formulas. Support linkage action and feedback signal display. Support offline programming via USB for linkage logic and device notes. System Operation & Control Three-level authority control with password protection (Level I/II/III). Functions: mute, reset, self-test, silence/resound sounder. Multi-language switch (Chinese/English) and time/print setup. Store up to 2000 pieces of fire alarm, fault, and event history logs. Communication & Networking Equipped with CAN and RS485 interfaces for CRT connection and networking. Support master/slave/stand-alone networking mode and information transmission /reception. Power Management Dual power supply: AC230V main power + 2×12V12AH backup battery. Battery charge control, internal resistance detection, and fault alarm. 24V power output for field FPE and sounder strobe. Display & Output 7-inch color LCD (800×480) for visual information display. Built-in printer for real-time printing of fire, fault, and event records. Multi-LED indicator panel for system status, zone status, and FPE status. 3. Installation & Maintenance Modular plug-in structure for easy installation, commissioning, and expansion. Loop short-circuit isolation via loop isolator to ensure system stability. Regular test guidance and common fault troubleshooting. TECHNICAL SPECIFICATIONS Volate AC230V(50HZ), Voltage range: +10%--15% Current 1A Outputs Fire output .Fault output .24V power output .Loop output Capacity 1020/4 loops addressable points LCD screen size 7-inch color LCD screen Standby bettery 12V/12AH sealed lead acid battery*2 Dimension(L*W*H) 420mm×140mm×560mm Operating environment Temperature:-5℃-+50℃: Relative Humidity:≤95%non- condensing Communication interface RS485、CAN、USB DETAILS The control panel is mounted on the wall through 4 mounting holes, the dimensions of the mounting holes are shown in the picture. The right side of the control panel has 8 wiring holes, which are easy for wiring between the control panel and field devices. There are also 5 knock holes at the top, if the holes on the right side are not enough. Add compatible detectors and supervisory devices at fire alarm

Intelligent Fire Alarm control panel LPCB fire controller 1 Loop 255points (it is also available for 2/3/4 loops). Color menu display Intelligent bus control mode; max 255 addressable points per loop, max 4 loops, max 48 zones Loop card type design:1-4 loop card can be seledted Glass fuse per loop Black box function Independent controlling password for the specially needed gas recharging units Self-design loop protocol Wall-mounted structure, compact and exquisite Akzo outer coating;anti-corrosion Language:English Approvals：LPCB（EN54-2/4） CE Core Functions 1. Fire Alarm Monitoring Detect fire signals from addressable smoke/heat detectors, manual call points, and other fire-sensing devices. Display the first/last fire alarm, zone location, device address, and time stamp in real time. Trigger fire alarm output (HJ+/HJ–) and sounder strobe for on-site audible-visual alert. Fault Detection & Indication Monitor system faults: main power fault, battery fault, loop communication fault, system fault. Monitor field device faults: detector fault, module fault, sounder strobe fault, FPE fault, zone fault. Output fault relay signal and show fault information on LCD and LED indicators. 2. Device & Zone Management Support up to 4 loops, max 255 addressable points per loop, total 1020 points. Support up to 48 zones with independent fire alarm and fault/disable indicators. Support device registration, query, definition (second code, type, attribute, location note). Support zone/addressable point/sounder/FPE disable and enable. Linkage Control Automatically start/stop FPE devices (I/O modules, fire dampers, fire pumps, etc.) via logic linkage formulas. Support linkage action and feedback signal display. Support offline programming via USB for linkage logic and device notes. System Operation & Control Three-level authority control with password protection (Level I/II/III). Functions: mute, reset, self-test, silence/resound sounder. Multi-language switch (Chinese/English) and time/print setup. Store up to 2000 pieces of fire alarm, fault, and event history logs. Communication & Networking Equipped with CAN and RS485 interfaces for CRT connection and networking. Support master/slave/stand-alone networking mode and information transmission /reception. Power Management Dual power supply: AC230V main power + 2×12V12AH backup battery. Battery charge control, internal resistance detection, and fault alarm. 24V power output for field FPE and sounder strobe. Display & Output 7-inch color LCD (800×480) for visual information display. Built-in printer for real-time printing of fire, fault, and event records. Multi-LED indicator panel for system status, zone status, and FPE status. 3. Installation & Maintenance Modular plug-in structure for easy installation, commissioning, and expansion. Loop short-circuit isolation via loop isolator to ensure system stability. Regular test guidance and common fault troubleshooting. TECHNICAL SPECIFICATIONS Volate AC230V(50HZ), Voltage range: +10%--15% Current 1A Outputs Fire output .Fault output .24V power output .Loop output Capacity 1020/4 loops addressable points LCD screen size 7-inch color LCD screen Standby bettery 12V/12AH sealed lead acid battery*2 Dimension(L*W*H) 420mm×140mm×560mm Operating environment Temperature:-5℃-+50℃: Relative Humidity:≤95%non- condensing Communication interface RS485、CAN、USB DETAILS The control panel is mounted on the wall through 4 mounting holes, the dimensions of the mounting holes are shown in the picture. The right side of the control panel has 8 wiring holes, which are easy for wiring between the control panel and field devices. There are also 5 knock holes at the top, if the holes on the right side are not enough. Add compatible detectors and supervisory devices at fire alarm

Intelligent Fire Alarm control panel LPCB fire controller 1 Loop 255points (it is also available for 2/3/4 loops). Color menu display Intelligent bus control mode; max 255 addressable points per loop, max 4 loops, max 48 zones Loop card type design:1-4 loop card can be seledted Glass fuse per loop Black box function Independent controlling password for the specially needed gas recharging units Self-design loop protocol Wall-mounted structure, compact and exquisite Akzo outer coating;anti-corrosion Language:English Approvals：LPCB（EN54-2/4） CE Core Functions 1. Fire Alarm Monitoring Detect fire signals from addressable smoke/heat detectors, manual call points, and other fire-sensing devices. Display the first/last fire alarm, zone location, device address, and time stamp in real time. Trigger fire alarm output (HJ+/HJ–) and sounder strobe for on-site audible-visual alert. Fault Detection & Indication Monitor system faults: main power fault, battery fault, loop communication fault, system fault. Monitor field device faults: detector fault, module fault, sounder strobe fault, FPE fault, zone fault. Output fault relay signal and show fault information on LCD and LED indicators. 2. Device & Zone Management Support up to 4 loops, max 255 addressable points per loop, total 1020 points. Support up to 48 zones with independent fire alarm and fault/disable indicators. Support device registration, query, definition (second code, type, attribute, location note). Support zone/addressable point/sounder/FPE disable and enable. Linkage Control Automatically start/stop FPE devices (I/O modules, fire dampers, fire pumps, etc.) via logic linkage formulas. Support linkage action and feedback signal display. Support offline programming via USB for linkage logic and device notes. System Operation & Control Three-level authority control with password protection (Level I/II/III). Functions: mute, reset, self-test, silence/resound sounder. Multi-language switch (Chinese/English) and time/print setup. Store up to 2000 pieces of fire alarm, fault, and event history logs. Communication & Networking Equipped with CAN and RS485 interfaces for CRT connection and networking. Support master/slave/stand-alone networking mode and information transmission /reception. Power Management Dual power supply: AC230V main power + 2×12V12AH backup battery. Battery charge control, internal resistance detection, and fault alarm. 24V power output for field FPE and sounder strobe. Display & Output 7-inch color LCD (800×480) for visual information display. Built-in printer for real-time printing of fire, fault, and event records. Multi-LED indicator panel for system status, zone status, and FPE status. 3. Installation & Maintenance Modular plug-in structure for easy installation, commissioning, and expansion. Loop short-circuit isolation via loop isolator to ensure system stability. Regular test guidance and common fault troubleshooting. TECHNICAL SPECIFICATIONS Volate AC230V(50HZ), Voltage range: +10%--15% Current 1A Outputs Fire output .Fault output .24V power output .Loop output Capacity 1020/4 loops addressable points LCD screen size 7-inch color LCD screen Standby bettery 12V/12AH sealed lead acid battery*2 Dimension(L*W*H) 420mm×140mm×560mm Operating environment Temperature:-5℃-+50℃: Relative Humidity:≤95%non- condensing Communication interface RS485、CAN、USB DETAILS The control panel is mounted on the wall through 4 mounting holes, the dimensions of the mounting holes are shown in the picture. The right side of the control panel has 8 wiring holes, which are easy for wiring between the control panel and field devices. There are also 5 knock holes at the top, if the holes on the right side are not enough. Add compatible detectors and supervisory devices at fire alarm

Solar powered wireless infrared break beam system 3-beams photoelectric intruder alarm 3-beams transmitter and receiver break alarm system consist as a light wall to block intruders outside. It is used for wall, fence, yard intrusion prevention. Solar power wireless beam is innovated perimeter system for easy installation and maintence. Features: 1. Improved infrared beam system with no wire needed. Solar power supply with DC battery charging as backup. Solar power can work for 1 year at cloudy or rainy weather condition. 2. IP66 grade and can work at extreme weather condition such as storm days. 3. Encoded wireless communication and RF communication between Transmitter terminal with Receiver terminal and receiver terminal with alarm panel. So, it will not be affected by malicious interference and environment interference. 4. Easy installation with horizontal tube and calibration infrared ray receiving value displayer for 50m Tx and Rx calibration. Laser calibrator can be used for more than 50m calibration. Description: This product overcomes the shortcomings of the same kind of infrared radiation detector, and has the advantages of simple installation, strong anti-interference, reliability and stability. It can be used for family or industrial, agricultural, military base perimeter invasion prevention. RF hopping & FM signal alarm with special wireless coding technology avoid mutual interference. With interference indication function. High reliability outdoor perimeter security Can use at -30℃~+70℃ with features of waterproof, wind & snow resistant Totally sealed and with on the spot sounder built-in Self-check and report to alarm host such as offset, low power, non working It is used to prevent theft in courtyard, enclosure and other areas. Functions and Specification: 1.It is a solar-powered wireless product and should be installed at place with sunlight intensity more than 2200lux. 2.It is three beams wireless outdoor infrared detectors working by pairs of transmitter and receiver. 3.Irradiation distance:100m 4.Wireless transmitting distance:800m 5.Wireless frequency:433MHz 6.Maximum alarm times in 24 hours:

Solar powered wireless infrared break beam system 3-beams photoelectric intruder alarm 3-beams transmitter and receiver break alarm system consist as a light wall to block intruders outside. It is used for wall, fence, yard intrusion prevention. Solar power wireless beam is innovated perimeter system for easy installation and maintence. Features: 1. Improved infrared beam system with no wire needed. Solar power supply with DC battery charging as backup. Solar power can work for 1 year at cloudy or rainy weather condition. 2. IP66 grade and can work at extreme weather condition such as storm days. 3. Encoded wireless communication and RF communication between Transmitter terminal with Receiver terminal and receiver terminal with alarm panel. So, it will not be affected by malicious interference and environment interference. 4. Easy installation with horizontal tube and calibration infrared ray receiving value displayer for 50m Tx and Rx calibration. Laser calibrator can be used for more than 50m calibration. Description: This product overcomes the shortcomings of the same kind of infrared radiation detector, and has the advantages of simple installation, strong anti-interference, reliability and stability. It can be used for family or industrial, agricultural, military base perimeter invasion prevention. RF hopping & FM signal alarm with special wireless coding technology avoid mutual interference. With interference indication function. High reliability outdoor perimeter security Can use at -30℃~+70℃ with features of waterproof, wind & snow resistant Totally sealed and with on the spot sounder built-in Self-check and report to alarm host such as offset, low power, non working It is used to prevent theft in courtyard, enclosure and other areas. Functions and Specification: 1.It is a solar-powered wireless product and should be installed at place with sunlight intensity more than 2200lux. 2.It is three beams wireless outdoor infrared detectors working by pairs of transmitter and receiver. 3.Irradiation distance:100m 4.Wireless transmitting distance:800m 5.Wireless frequency:433MHz 6.Maximum alarm times in 24 hours:

Solar powered wireless infrared break beam system 3-beams photoelectric intruder alarm 3-beams transmitter and receiver break alarm system consist as a light wall to block intruders outside. It is used for wall, fence, yard intrusion prevention. Solar power wireless beam is innovated perimeter system for easy installation and maintence. Features: 1. Improved infrared beam system with no wire needed. Solar power supply with DC battery charging as backup. Solar power can work for 1 year at cloudy or rainy weather condition. 2. IP66 grade and can work at extreme weather condition such as storm days. 3. Encoded wireless communication and RF communication between Transmitter terminal with Receiver terminal and receiver terminal with alarm panel. So, it will not be affected by malicious interference and environment interference. 4. Easy installation with horizontal tube and calibration infrared ray receiving value displayer for 50m Tx and Rx calibration. Laser calibrator can be used for more than 50m calibration. Description: This product overcomes the shortcomings of the same kind of infrared radiation detector, and has the advantages of simple installation, strong anti-interference, reliability and stability. It can be used for family or industrial, agricultural, military base perimeter invasion prevention. RF hopping & FM signal alarm with special wireless coding technology avoid mutual interference. With interference indication function. High reliability outdoor perimeter security Can use at -30℃~+70℃ with features of waterproof, wind & snow resistant Totally sealed and with on the spot sounder built-in Self-check and report to alarm host such as offset, low power, non working It is used to prevent theft in courtyard, enclosure and other areas. Functions and Specification: 1.It is a solar-powered wireless product and should be installed at place with sunlight intensity more than 2200lux. 2.It is three beams wireless outdoor infrared detectors working by pairs of transmitter and receiver. 3.Irradiation distance:100m 4.Wireless transmitting distance:800m 5.Wireless frequency:433MHz 6.Maximum alarm times in 24 hours:

The fire alarm control panels (4 Zones, 8 Zones, and 16 Zones) provide all of the sophisticated features required of a leading edge conventional fire alarm system along with the simple operation and efficient installation methods demanded by both installers and building users. The panel can be flush or surface mounted and the generously sized metal back box allows ample space for rear or top cable entries. A comprehensive range of auxiliary devices is available to operate with the fire control panels including optical, ionization, photoelectric, and heat detectors. Each of the system components has been specifically designed to operate as part of the system. This provides assurance that the control panel, smoke detectors,interface devices and the ancillary components are all fully compatible with one another and that the full range of system functionality is supported by each device. Installation manual can be downloaded at alarm system support 1.1 Product features The panels have the following key features: 4, 8, or 16 conventional input zones. 2 notification appliance circuits (NAC, Sounder) with built-in synchronization forANSI 3.41and Gentex. The panel comes with a 3 amp power supply. Dedicated alarm and fault relays. 1 RS485 can be able to connect repeaters. Enclosure supports two 12V, 7Ah backup batteries. 1.2 Electrical specifications Primary AC 200 to 240VAC 50/60 Hz Standby current: 50mA@220VAC,Alarm current: 85mA@220VAC Power supply rating 3Amps @ 24VDC Maximum Battery Charging Current 0.98 Amps @ 26VDC Initiating Device Circuits 4 Zones Alarm Zone 1, 2, 3, & 4 Initiating Device Circuits 8 Zones Alarm Zone 1, 2, 3, 4, 5, 6, 7, & 8 Initiating Device Circuits 16 Zones Alarm Zone 1, 2, 3, 4, 5, 6, 7, 8,9,10,11,12,13,14,15, &16 Normal Initiating Operating Voltage 23VDC, Maximum 26VDC, regulated Short Circuit Initiating Current (per zone) 35mA Maximum Maximum Initiating Resistance (per zone) 10 ohms Initiating End-of-Line Resistor 4K7 ohms, 1/2W 5% Standby Detector Current (per zone) 4mA maximum Maximum Detector Count (per zone) 30 detectors Initiating Cabling Type 18AWG Twisted Shielded pair (14 – 18 AWG) Detector Base Impedance 430 ohms Notification Appliance Circuits(Sounder) 2 NACs, SpecialApplication Maximum NAC Current Rating 1Amp maximum per circuit NAC End-of-line Resistor 10K ohms 1/2W 5% FAULT Relay rating 2A& 30VAC, resistive Alarm(Auxiliary ) Relay rating 2A& 30VAC, resistive Enclosure Dimensions 353mm(L)×282mm(H)×101mm(W) Net Weight 3.1kg (Without batteries)

The fire alarm control panels (4 Zones, 8 Zones, and 16 Zones) provide all of the sophisticated features required of a leading edge conventional fire alarm system along with the simple operation and efficient installation methods demanded by both installers and building users. The panel can be flush or surface mounted and the generously sized metal back box allows ample space for rear or top cable entries. A comprehensive range of auxiliary devices is available to operate with the fire control panels including optical, ionization, photoelectric, and heat detectors. Each of the system components has been specifically designed to operate as part of the system. This provides assurance that the control panel, smoke detectors,interface devices and the ancillary components are all fully compatible with one another and that the full range of system functionality is supported by each device. Installation manual can be downloaded at alarm system support 1.1 Product features The panels have the following key features: 4, 8, or 16 conventional input zones. 2 notification appliance circuits (NAC, Sounder) with built-in synchronization forANSI 3.41and Gentex. The panel comes with a 3 amp power supply. Dedicated alarm and fault relays. 1 RS485 can be able to connect repeaters. Enclosure supports two 12V, 7Ah backup batteries. 1.2 Electrical specifications Primary AC 200 to 240VAC 50/60 Hz Standby current: 50mA@220VAC,Alarm current: 85mA@220VAC Power supply rating 3Amps @ 24VDC Maximum Battery Charging Current 0.98 Amps @ 26VDC Initiating Device Circuits 4 Zones Alarm Zone 1, 2, 3, & 4 Initiating Device Circuits 8 Zones Alarm Zone 1, 2, 3, 4, 5, 6, 7, & 8 Initiating Device Circuits 16 Zones Alarm Zone 1, 2, 3, 4, 5, 6, 7, 8,9,10,11,12,13,14,15, &16 Normal Initiating Operating Voltage 23VDC, Maximum 26VDC, regulated Short Circuit Initiating Current (per zone) 35mA Maximum Maximum Initiating Resistance (per zone) 10 ohms Initiating End-of-Line Resistor 4K7 ohms, 1/2W 5% Standby Detector Current (per zone) 4mA maximum Maximum Detector Count (per zone) 30 detectors Initiating Cabling Type 18AWG Twisted Shielded pair (14 – 18 AWG) Detector Base Impedance 430 ohms Notification Appliance Circuits(Sounder) 2 NACs, SpecialApplication Maximum NAC Current Rating 1Amp maximum per circuit NAC End-of-line Resistor 10K ohms 1/2W 5% FAULT Relay rating 2A& 30VAC, resistive Alarm(Auxiliary ) Relay rating 2A& 30VAC, resistive Enclosure Dimensions 353mm(L)×282mm(H)×101mm(W) Net Weight 3.1kg (Without batteries)

The fire alarm control panels (4 Zones, 8 Zones, and 16 Zones) provide all of the sophisticated features required of a leading edge conventional fire alarm system along with the simple operation and efficient installation methods demanded by both installers and building users. The panel can be flush or surface mounted and the generously sized metal back box allows ample space for rear or top cable entries. A comprehensive range of auxiliary devices is available to operate with the fire control panels including optical, ionization, photoelectric, and heat detectors. Each of the system components has been specifically designed to operate as part of the system. This provides assurance that the control panel, smoke detectors,interface devices and the ancillary components are all fully compatible with one another and that the full range of system functionality is supported by each device. Installation manual can be downloaded at alarm system support 1.1 Product features The panels have the following key features: 4, 8, or 16 conventional input zones. 2 notification appliance circuits (NAC, Sounder) with built-in synchronization forANSI 3.41and Gentex. The panel comes with a 3 amp power supply. Dedicated alarm and fault relays. 1 RS485 can be able to connect repeaters. Enclosure supports two 12V, 7Ah backup batteries. 1.2 Electrical specifications Primary AC 200 to 240VAC 50/60 Hz Standby current: 50mA@220VAC,Alarm current: 85mA@220VAC Power supply rating 3Amps @ 24VDC Maximum Battery Charging Current 0.98 Amps @ 26VDC Initiating Device Circuits 4 Zones Alarm Zone 1, 2, 3, & 4 Initiating Device Circuits 8 Zones Alarm Zone 1, 2, 3, 4, 5, 6, 7, & 8 Initiating Device Circuits 16 Zones Alarm Zone 1, 2, 3, 4, 5, 6, 7, 8,9,10,11,12,13,14,15, &16 Normal Initiating Operating Voltage 23VDC, Maximum 26VDC, regulated Short Circuit Initiating Current (per zone) 35mA Maximum Maximum Initiating Resistance (per zone) 10 ohms Initiating End-of-Line Resistor 4K7 ohms, 1/2W 5% Standby Detector Current (per zone) 4mA maximum Maximum Detector Count (per zone) 30 detectors Initiating Cabling Type 18AWG Twisted Shielded pair (14 – 18 AWG) Detector Base Impedance 430 ohms Notification Appliance Circuits(Sounder) 2 NACs, SpecialApplication Maximum NAC Current Rating 1Amp maximum per circuit NAC End-of-line Resistor 10K ohms 1/2W 5% FAULT Relay rating 2A& 30VAC, resistive Alarm(Auxiliary ) Relay rating 2A& 30VAC, resistive Enclosure Dimensions 353mm(L)×282mm(H)×101mm(W) Net Weight 3.1kg (Without batteries)

Meian technology manufactured new commercial security alarm panel for surveillance alarm. The package include one panel with 4G and TCP/IP network and 1 wired keypad for programming. Features: P2P Cloud Server Free Usage Now you can have a trip network security system which you can control from anywhere in the world. free download your mobile APP, No need to set up static IP address or configure the nework connection on-site. Just scan the QR code from the host panel sticker directly remote Arm/Disarm, checking the system status and setting up notifications, video cameras on-site seeing. you can now have ultimate control of your home security whenever required. 4G & TCP/IP Network DSDS Connections, More Secure And Stable The Host with GSM/GPRS and 4G support,DSDS way, TCP/IP network. No matter what home/store/shop trouble for the IP network . Host will notice you and keeps working with GSM /GPRS way and 4G network for reporting as your desire. Independent Areas Management Separately With 4 areas for the host which can be armed/disarmed independently from users. Duress Password Any illegal or trespassing intruders get into the house and threaten to user disarm the system, User can input duress password, the host will disarm the system and send alarm notice out privately. Support 1080p ONVIF Cameras Connected From the APP, users can scan the QR code from the wifi cameras to access to our server, users can review the video at anytime, anywhere. It can snap the alarm picture, backup the alarm video to your smartphone. 88 Wired Devices Compartitable With RS485 bus cable, support 56 wired devices with zone expander module. 32pcs Power Bus which have two cable connect the wired devices via the power bus module for saving the construction cost and time. 8PCS 16CH Relay Module Support 8pcs relay module. easily to realize the smart devcies remote control lock, light, smart home appliances. Intercom from the Devcie and App at any time. Download Meian designed APP, users can realize the intercom between the APP and devices. SIA-TCP, SIA-UDP, Meian Private IP protocol Support SIA-UDP, TCP Global standard Protocol. More effective docking way to compatible with customers CMS platform. CMS operation video demo at CMS OPERATION

Meian technology manufactured new commercial security alarm panel for surveillance alarm. The package include one panel with 4G and TCP/IP network and 1 wired keypad for programming. Features: P2P Cloud Server Free Usage Now you can have a trip network security system which you can control from anywhere in the world. free download your mobile APP, No need to set up static IP address or configure the nework connection on-site. Just scan the QR code from the host panel sticker directly remote Arm/Disarm, checking the system status and setting up notifications, video cameras on-site seeing. you can now have ultimate control of your home security whenever required. 4G & TCP/IP Network DSDS Connections, More Secure And Stable The Host with GSM/GPRS and 4G support,DSDS way, TCP/IP network. No matter what home/store/shop trouble for the IP network . Host will notice you and keeps working with GSM /GPRS way and 4G network for reporting as your desire. Independent Areas Management Separately With 4 areas for the host which can be armed/disarmed independently from users. Duress Password Any illegal or trespassing intruders get into the house and threaten to user disarm the system, User can input duress password, the host will disarm the system and send alarm notice out privately. Support 1080p ONVIF Cameras Connected From the APP, users can scan the QR code from the wifi cameras to access to our server, users can review the video at anytime, anywhere. It can snap the alarm picture, backup the alarm video to your smartphone. 88 Wired Devices Compartitable With RS485 bus cable, support 56 wired devices with zone expander module. 32pcs Power Bus which have two cable connect the wired devices via the power bus module for saving the construction cost and time. 8PCS 16CH Relay Module Support 8pcs relay module. easily to realize the smart devcies remote control lock, light, smart home appliances. Intercom from the Devcie and App at any time. Download Meian designed APP, users can realize the intercom between the APP and devices. SIA-TCP, SIA-UDP, Meian Private IP protocol Support SIA-UDP, TCP Global standard Protocol. More effective docking way to compatible with customers CMS platform. CMS operation video demo at CMS OPERATION

Meian technology manufactured new commercial security alarm panel for surveillance alarm. The package include one panel with 4G and TCP/IP network and 1 wired keypad for programming. Features: P2P Cloud Server Free Usage Now you can have a trip network security system which you can control from anywhere in the world. free download your mobile APP, No need to set up static IP address or configure the nework connection on-site. Just scan the QR code from the host panel sticker directly remote Arm/Disarm, checking the system status and setting up notifications, video cameras on-site seeing. you can now have ultimate control of your home security whenever required. 4G & TCP/IP Network DSDS Connections, More Secure And Stable The Host with GSM/GPRS and 4G support,DSDS way, TCP/IP network. No matter what home/store/shop trouble for the IP network . Host will notice you and keeps working with GSM /GPRS way and 4G network for reporting as your desire. Independent Areas Management Separately With 4 areas for the host which can be armed/disarmed independently from users. Duress Password Any illegal or trespassing intruders get into the house and threaten to user disarm the system, User can input duress password, the host will disarm the system and send alarm notice out privately. Support 1080p ONVIF Cameras Connected From the APP, users can scan the QR code from the wifi cameras to access to our server, users can review the video at anytime, anywhere. It can snap the alarm picture, backup the alarm video to your smartphone. 88 Wired Devices Compartitable With RS485 bus cable, support 56 wired devices with zone expander module. 32pcs Power Bus which have two cable connect the wired devices via the power bus module for saving the construction cost and time. 8PCS 16CH Relay Module Support 8pcs relay module. easily to realize the smart devcies remote control lock, light, smart home appliances. Intercom from the Devcie and App at any time. Download Meian designed APP, users can realize the intercom between the APP and devices. SIA-TCP, SIA-UDP, Meian Private IP protocol Support SIA-UDP, TCP Global standard Protocol. More effective docking way to compatible with customers CMS platform. CMS operation video demo at CMS OPERATION

1. Wired/BUS compatible, 8 sections digital frequency conversion; 2. Intelligent rain/fog recognition, transmission power can be adjusted intelligently; 3. Detachable dual-system, programmable multi modes; 4. Intelligent power transmission, self-adaptation in environment; 5. Mutual-transmission and relay style infrared receiving and transmitting modes are optional; 6. Patented balanced checking,waterproof grade IP65. The hard wired 6 beam infrared detector is with relay output N/C or N/O contact to work with any brand alarm control panel. It can be used normally in various harsh weather conditions such as rainy days, heavy fog, sand and dust, and temperatures ranging from -25 to 45 degrees Celsius. Dealing with various environments. Patent balance detection digital filtering technology. Digital filtering balances the signals detected by infrared sensors. Enhanced the simulation of noise and electromagnetic interference. Enhanced anti-interference function. Infrared emitter and receiver Both can be adjusted 90 ° left and right, up and down 10° Debugging is simpler and more convenient during construction Accurate and rapid response to light. Wired infrared external normally open/normally closed The switch signal outputs the infrared radiation signal Connected to barrier gate controllers or glass doors Connect the switch controller Can realize the passage of people and vehicles Automatic lifting and lowering of barrier gate lever Glass door automatic switch Anti smashing and anti pinch. Associated with video alarm host or camera through alarm platform Linkage of cameras during alarm and implementation of alarm video review Accurately handle police situations.

1. Wired/BUS compatible, 8 sections digital frequency conversion; 2. Intelligent rain/fog recognition, transmission power can be adjusted intelligently; 3. Detachable dual-system, programmable multi modes; 4. Intelligent power transmission, self-adaptation in environment; 5. Mutual-transmission and relay style infrared receiving and transmitting modes are optional; 6. Patented balanced checking,waterproof grade IP65. The hard wired 6 beam infrared detector is with relay output N/C or N/O contact to work with any brand alarm control panel. It can be used normally in various harsh weather conditions such as rainy days, heavy fog, sand and dust, and temperatures ranging from -25 to 45 degrees Celsius. Dealing with various environments. Patent balance detection digital filtering technology. Digital filtering balances the signals detected by infrared sensors. Enhanced the simulation of noise and electromagnetic interference. Enhanced anti-interference function. Infrared emitter and receiver Both can be adjusted 90 ° left and right, up and down 10° Debugging is simpler and more convenient during construction Accurate and rapid response to light. Wired infrared external normally open/normally closed The switch signal outputs the infrared radiation signal Connected to barrier gate controllers or glass doors Connect the switch controller Can realize the passage of people and vehicles Automatic lifting and lowering of barrier gate lever Glass door automatic switch Anti smashing and anti pinch. Associated with video alarm host or camera through alarm platform Linkage of cameras during alarm and implementation of alarm video review Accurately handle police situations.

1. Wired/BUS compatible, 8 sections digital frequency conversion; 2. Intelligent rain/fog recognition, transmission power can be adjusted intelligently; 3. Detachable dual-system, programmable multi modes; 4. Intelligent power transmission, self-adaptation in environment; 5. Mutual-transmission and relay style infrared receiving and transmitting modes are optional; 6. Patented balanced checking,waterproof grade IP65. The hard wired 6 beam infrared detector is with relay output N/C or N/O contact to work with any brand alarm control panel. It can be used normally in various harsh weather conditions such as rainy days, heavy fog, sand and dust, and temperatures ranging from -25 to 45 degrees Celsius. Dealing with various environments. Patent balance detection digital filtering technology. Digital filtering balances the signals detected by infrared sensors. Enhanced the simulation of noise and electromagnetic interference. Enhanced anti-interference function. Infrared emitter and receiver Both can be adjusted 90 ° left and right, up and down 10° Debugging is simpler and more convenient during construction Accurate and rapid response to light. Wired infrared external normally open/normally closed The switch signal outputs the infrared radiation signal Connected to barrier gate controllers or glass doors Connect the switch controller Can realize the passage of people and vehicles Automatic lifting and lowering of barrier gate lever Glass door automatic switch Anti smashing and anti pinch. Associated with video alarm host or camera through alarm platform Linkage of cameras during alarm and implementation of alarm video review Accurately handle police situations.

The bell remains the most commonly used alarm for fire evacuation system, for wall applications, indoors. They are designed to be used in 24 volt DC systems. Specifications Voltage ranges: 20vdc to 28vdc (Nonpolarity) Power and current consumption: 1W, 38ma@24vdc(maximum) Number of standard: EN54-3 Sound level：80dB（A）@1M (minimum) Service Use: Fire alarm, general signaling, burglar alarm Environment type: Type A (indoor) Input terminal Wire Gauge: 0.28 mm2 to 1.5 mm2 Operating Temp.: -10℃ to +55℃ Operating Humidity Range: 10% to 93% Relative Humidity ( Non-condensing) Material of cover: Aluminum Dimension: 150mm×50mm（D*H) (Without bracket) Weight: Net Weight 342g, Gross Weight 395g Download fire alarm system instruction and manual at fire alarms Wiring The system designer must make sure that the total current drawn by the devices on the loop does not exceed the current capability of the panel supply, and that the last device on the circuit is operated within its rated voltage. When calculating the voltage available to the last device, it is necessary to consider the voltage drop due to the resistance of the wire. The thicker the wire, the smaller the voltage drops. Wire resistance tables can be obtained from electrical handbooks.

The bell remains the most commonly used alarm for fire evacuation system, for wall applications, indoors. They are designed to be used in 24 volt DC systems. Specifications Voltage ranges: 20vdc to 28vdc (Nonpolarity) Power and current consumption: 1W, 38ma@24vdc(maximum) Number of standard: EN54-3 Sound level：80dB（A）@1M (minimum) Service Use: Fire alarm, general signaling, burglar alarm Environment type: Type A (indoor) Input terminal Wire Gauge: 0.28 mm2 to 1.5 mm2 Operating Temp.: -10℃ to +55℃ Operating Humidity Range: 10% to 93% Relative Humidity ( Non-condensing) Material of cover: Aluminum Dimension: 150mm×50mm（D*H) (Without bracket) Weight: Net Weight 342g, Gross Weight 395g Download fire alarm system instruction and manual at fire alarms Wiring The system designer must make sure that the total current drawn by the devices on the loop does not exceed the current capability of the panel supply, and that the last device on the circuit is operated within its rated voltage. When calculating the voltage available to the last device, it is necessary to consider the voltage drop due to the resistance of the wire. The thicker the wire, the smaller the voltage drops. Wire resistance tables can be obtained from electrical handbooks.

The bell remains the most commonly used alarm for fire evacuation system, for wall applications, indoors. They are designed to be used in 24 volt DC systems. Specifications Voltage ranges: 20vdc to 28vdc (Nonpolarity) Power and current consumption: 1W, 38ma@24vdc(maximum) Number of standard: EN54-3 Sound level：80dB（A）@1M (minimum) Service Use: Fire alarm, general signaling, burglar alarm Environment type: Type A (indoor) Input terminal Wire Gauge: 0.28 mm2 to 1.5 mm2 Operating Temp.: -10℃ to +55℃ Operating Humidity Range: 10% to 93% Relative Humidity ( Non-condensing) Material of cover: Aluminum Dimension: 150mm×50mm（D*H) (Without bracket) Weight: Net Weight 342g, Gross Weight 395g Download fire alarm system instruction and manual at fire alarms Wiring The system designer must make sure that the total current drawn by the devices on the loop does not exceed the current capability of the panel supply, and that the last device on the circuit is operated within its rated voltage. When calculating the voltage available to the last device, it is necessary to consider the voltage drop due to the resistance of the wire. The thicker the wire, the smaller the voltage drops. Wire resistance tables can be obtained from electrical handbooks.