All Products

Solar power perimeter security solution outdoor siren strobe wireless HB-JHD-2 Solar-power Wireless Warning Lamp can work with solar beams for driveway security system. Solar-power Warning Siren Strobe is with built-in sounder and high light lamp. It will illuminate the defense zone and make loud sound when alarm. It can learn maximum 32 wireless HB brand 433MHz wireless infrared beams, grating and remote controller. Function: 1. With power on/off button and low illumination sound indication. It will trigger alarm when it is off. 2. Can select alarm sound. 3. Can check power on/off status, device working status and test it. 4. Can use remote controller to arm, disarm, emergency alarm and cancel alarm. 5. It should be installed at place with enough sunlight. Specification: 1. Working voltage: 6.4V 2. Battery type: LiFePO4 battery 3. Battery capacity: 3000mAH 4. Static working rate current: 2mA 5. Wireless receiving distance: 300m at open area 6. Can enroll maximum 32 wireless devices including remote controller, wireless beam detector, panic button, door contact etc. 7. Working environment temperature:-30℃~70℃ 8. Alarm Volume: 90dB 9. High light LED luminous flux: 70 lm each 10. Dimension: 280*180*74mm

Solar power perimeter security solution outdoor siren strobe wireless HB-JHD-2 Solar-power Wireless Warning Lamp can work with solar beams for driveway security system. Solar-power Warning Siren Strobe is with built-in sounder and high light lamp. It will illuminate the defense zone and make loud sound when alarm. It can learn maximum 32 wireless HB brand 433MHz wireless infrared beams, grating and remote controller. Function: 1. With power on/off button and low illumination sound indication. It will trigger alarm when it is off. 2. Can select alarm sound. 3. Can check power on/off status, device working status and test it. 4. Can use remote controller to arm, disarm, emergency alarm and cancel alarm. 5. It should be installed at place with enough sunlight. Specification: 1. Working voltage: 6.4V 2. Battery type: LiFePO4 battery 3. Battery capacity: 3000mAH 4. Static working rate current: 2mA 5. Wireless receiving distance: 300m at open area 6. Can enroll maximum 32 wireless devices including remote controller, wireless beam detector, panic button, door contact etc. 7. Working environment temperature:-30℃~70℃ 8. Alarm Volume: 90dB 9. High light LED luminous flux: 70 lm each 10. Dimension: 280*180*74mm

Solar power perimeter security solution outdoor siren strobe wireless HB-JHD-2 Solar-power Wireless Warning Lamp can work with solar beams for driveway security system. Solar-power Warning Siren Strobe is with built-in sounder and high light lamp. It will illuminate the defense zone and make loud sound when alarm. It can learn maximum 32 wireless HB brand 433MHz wireless infrared beams, grating and remote controller. Function: 1. With power on/off button and low illumination sound indication. It will trigger alarm when it is off. 2. Can select alarm sound. 3. Can check power on/off status, device working status and test it. 4. Can use remote controller to arm, disarm, emergency alarm and cancel alarm. 5. It should be installed at place with enough sunlight. Specification: 1. Working voltage: 6.4V 2. Battery type: LiFePO4 battery 3. Battery capacity: 3000mAH 4. Static working rate current: 2mA 5. Wireless receiving distance: 300m at open area 6. Can enroll maximum 32 wireless devices including remote controller, wireless beam detector, panic button, door contact etc. 7. Working environment temperature:-30℃~70℃ 8. Alarm Volume: 90dB 9. High light LED luminous flux: 70 lm each 10. Dimension: 280*180*74mm

LPCB Approved Intelligent smoke detector Addressable fire alarm system works with TC series addressable fire alarm system LPCB TC-5109 alarm panel fire fighting Infrared scattering principle Non-polarized two-wire Drift compensation and fault detecting function Reporting dirt fault Hotel, restaurant, warehouse, library, office building, teaching building, power plant and other places Approvals：LPCB（EN54-7） CE Technical Specifications Operating voltage Loop 24V(18.5V～26V) Operating current Standby current: ≤0.3mA;Alarm current: ≤0.8mA Operating Environment Temperature: -10°C～+55°C,Relative Humidity: ≤95%, non-condensing Indicator Red,Flashes when polling,Illuminates in alarm Ingress protection rating IP23 Material and color of enclosure ABS; Milky white Coding method Electronically coding Code range 1～255 Weight About 110g Mounting hole distance 60mm Dimension 100mm×51mm (with base) Product installation manual and video at smoke detector

LPCB Approved Intelligent smoke detector Addressable fire alarm system works with TC series addressable fire alarm system LPCB TC-5109 alarm panel fire fighting Infrared scattering principle Non-polarized two-wire Drift compensation and fault detecting function Reporting dirt fault Hotel, restaurant, warehouse, library, office building, teaching building, power plant and other places Approvals：LPCB（EN54-7） CE Technical Specifications Operating voltage Loop 24V(18.5V～26V) Operating current Standby current: ≤0.3mA;Alarm current: ≤0.8mA Operating Environment Temperature: -10°C～+55°C,Relative Humidity: ≤95%, non-condensing Indicator Red,Flashes when polling,Illuminates in alarm Ingress protection rating IP23 Material and color of enclosure ABS; Milky white Coding method Electronically coding Code range 1～255 Weight About 110g Mounting hole distance 60mm Dimension 100mm×51mm (with base) Product installation manual and video at smoke detector

LPCB Approved Intelligent smoke detector Addressable fire alarm system works with TC series addressable fire alarm system LPCB TC-5109 alarm panel fire fighting Infrared scattering principle Non-polarized two-wire Drift compensation and fault detecting function Reporting dirt fault Hotel, restaurant, warehouse, library, office building, teaching building, power plant and other places Approvals：LPCB（EN54-7） CE Technical Specifications Operating voltage Loop 24V(18.5V～26V) Operating current Standby current: ≤0.3mA;Alarm current: ≤0.8mA Operating Environment Temperature: -10°C～+55°C,Relative Humidity: ≤95%, non-condensing Indicator Red,Flashes when polling,Illuminates in alarm Ingress protection rating IP23 Material and color of enclosure ABS; Milky white Coding method Electronically coding Code range 1～255 Weight About 110g Mounting hole distance 60mm Dimension 100mm×51mm (with base) Product installation manual and video at smoke detector

The device is photo-electronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm control panel. Two LEDs on each detector provide local 360° visible alarm indication. They flash every 3~5 seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The detector can be reset only by a momentary power interruption. Find datasheet and installation manual of fire alarms at conventional smoke detector Features and Benefits: Compatible with all the conventional fire alarm control panel Un-polarized wire input Wide range of operating voltages Unique optical sensing chamber Built in microprocessor intelligent software Two LEDs blink standby, provide 360° visibility Insect-resistant screening Twist-on mounting base with tamper lock Drift compensation and smoothing algorithms Remote Indicator LED can be connected. Technical Specifications Diameter: 103mm Height (including mounting base): 55 mm Weight: 155 g Operating Temperature Range: -10°C to 50°C Operating Humidity Range: 10% to 93% Relative Humidity, Noncondensing Latching Alarm: Reset by momentary power interruption System Voltage (nominal): 24 VDC (9V~ 28VDC) Standby Current: 60 μA @ 24VDC Alarm Current: 30 mA @ 24VDC

The device is photo-electronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm control panel. Two LEDs on each detector provide local 360° visible alarm indication. They flash every 3~5 seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The detector can be reset only by a momentary power interruption. Find datasheet and installation manual of fire alarms at conventional smoke detector Features and Benefits: Compatible with all the conventional fire alarm control panel Un-polarized wire input Wide range of operating voltages Unique optical sensing chamber Built in microprocessor intelligent software Two LEDs blink standby, provide 360° visibility Insect-resistant screening Twist-on mounting base with tamper lock Drift compensation and smoothing algorithms Remote Indicator LED can be connected. Technical Specifications Diameter: 103mm Height (including mounting base): 55 mm Weight: 155 g Operating Temperature Range: -10°C to 50°C Operating Humidity Range: 10% to 93% Relative Humidity, Noncondensing Latching Alarm: Reset by momentary power interruption System Voltage (nominal): 24 VDC (9V~ 28VDC) Standby Current: 60 μA @ 24VDC Alarm Current: 30 mA @ 24VDC

The device is photo-electronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm control panel. Two LEDs on each detector provide local 360° visible alarm indication. They flash every 3~5 seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The detector can be reset only by a momentary power interruption. Find datasheet and installation manual of fire alarms at conventional smoke detector Features and Benefits: Compatible with all the conventional fire alarm control panel Un-polarized wire input Wide range of operating voltages Unique optical sensing chamber Built in microprocessor intelligent software Two LEDs blink standby, provide 360° visibility Insect-resistant screening Twist-on mounting base with tamper lock Drift compensation and smoothing algorithms Remote Indicator LED can be connected. Technical Specifications Diameter: 103mm Height (including mounting base): 55 mm Weight: 155 g Operating Temperature Range: -10°C to 50°C Operating Humidity Range: 10% to 93% Relative Humidity, Noncondensing Latching Alarm: Reset by momentary power interruption System Voltage (nominal): 24 VDC (9V~ 28VDC) Standby Current: 60 μA @ 24VDC Alarm Current: 30 mA @ 24VDC

HB-LD-32 is HB brand alarm control panel HB-G250 compatible 32 relay contact output linkage module. It can only be used with same brand alarm panel HB-G100. The 32 relay contact can be set to link with multiple alarm zones. One alarm zone can be set to link with one relay contact output only. The link correction can be checked. Relay contact status can be set to keep from 1--5999s. The relay contact can be linked with CCTV system for surveillance and video monitor. Specification: Working voltage: DC12V-14V Power required: >8W Communication interface: RS485 Static current: 100mA Single relay contact working current: 20mA Working temperature: -40℃～60℃ Dimension: 345×290×80（mm）

HB-LD-32 is HB brand alarm control panel HB-G250 compatible 32 relay contact output linkage module. It can only be used with same brand alarm panel HB-G100. The 32 relay contact can be set to link with multiple alarm zones. One alarm zone can be set to link with one relay contact output only. The link correction can be checked. Relay contact status can be set to keep from 1--5999s. The relay contact can be linked with CCTV system for surveillance and video monitor. Specification: Working voltage: DC12V-14V Power required: >8W Communication interface: RS485 Static current: 100mA Single relay contact working current: 20mA Working temperature: -40℃～60℃ Dimension: 345×290×80（mm）

HB-LD-32 is HB brand alarm control panel HB-G250 compatible 32 relay contact output linkage module. It can only be used with same brand alarm panel HB-G100. The 32 relay contact can be set to link with multiple alarm zones. One alarm zone can be set to link with one relay contact output only. The link correction can be checked. Relay contact status can be set to keep from 1--5999s. The relay contact can be linked with CCTV system for surveillance and video monitor. Specification: Working voltage: DC12V-14V Power required: >8W Communication interface: RS485 Static current: 100mA Single relay contact working current: 20mA Working temperature: -40℃～60℃ Dimension: 345×290×80（mm）

HB-ZJQ-3 HB brand solar power wireless beam sensor and other wireless device compatible wireless to wired adapter. It has 8 zones and works as an adapter to transfer HB wireless detectors alarm signal and fault signal to wired output. So, the perimeter security solar power wireless detectors can be easy to add to exist security alarm panel. It converts HB brand wireless solar powered active beams or grating signal to wired signal output for exist host. Main functions and features: 1.It enables the exist alarm system to add perimeter protection detectors easy. 2.DC12V power supply is required from the third party alarm host or other way. 3.It has 8 defense zones. Each zone learns maximum 6 detectors codes. Specification: 1.Operating voltage:12V~14V DC 2.Operating current:100mA ~150mA 3.Operating temperature:-30℃~70℃ 4.Wireless distance:100~300m(depending on power supply and operating condition)

HB-ZJQ-3 HB brand solar power wireless beam sensor and other wireless device compatible wireless to wired adapter. It has 8 zones and works as an adapter to transfer HB wireless detectors alarm signal and fault signal to wired output. So, the perimeter security solar power wireless detectors can be easy to add to exist security alarm panel. It converts HB brand wireless solar powered active beams or grating signal to wired signal output for exist host. Main functions and features: 1.It enables the exist alarm system to add perimeter protection detectors easy. 2.DC12V power supply is required from the third party alarm host or other way. 3.It has 8 defense zones. Each zone learns maximum 6 detectors codes. Specification: 1.Operating voltage:12V~14V DC 2.Operating current:100mA ~150mA 3.Operating temperature:-30℃~70℃ 4.Wireless distance:100~300m(depending on power supply and operating condition)

HB-ZJQ-3 HB brand solar power wireless beam sensor and other wireless device compatible wireless to wired adapter. It has 8 zones and works as an adapter to transfer HB wireless detectors alarm signal and fault signal to wired output. So, the perimeter security solar power wireless detectors can be easy to add to exist security alarm panel. It converts HB brand wireless solar powered active beams or grating signal to wired signal output for exist host. Main functions and features: 1.It enables the exist alarm system to add perimeter protection detectors easy. 2.DC12V power supply is required from the third party alarm host or other way. 3.It has 8 defense zones. Each zone learns maximum 6 detectors codes. Specification: 1.Operating voltage:12V~14V DC 2.Operating current:100mA ~150mA 3.Operating temperature:-30℃~70℃ 4.Wireless distance:100~300m(depending on power supply and operating condition)

Wireless FSK+FHSS alarming make sensor immune to signal-interference and false alarm. Strong anti-interference abiliyt to electromagnetic wave, strong light, small pets, which cut false alarm to the bottom. Solar charge Panel Voltage 5V 2.Standby battery 3 6Vlithum battery Volume 8500mAh 3 Working current Standby current 40uA 4.Detection Range: 8m, wireless transiting distance:500m HB T201 HB T205 HB T305 3 6Vlithum battery Volume 2 00mAh Alarming current 60mA 6 m, wireless transiting distance:500m Detection Angle: 4 (horizontal) 1 (perpendicular). Size 1 mmx8 mmx50mm Transmitting Frequency 433MHz FSK FHSS Transmitting time 5 seconds Working temperature -10- 55℃ How to program the solar pir detector?

Wireless FSK+FHSS alarming make sensor immune to signal-interference and false alarm. Strong anti-interference abiliyt to electromagnetic wave, strong light, small pets, which cut false alarm to the bottom. Solar charge Panel Voltage 5V 2.Standby battery 3 6Vlithum battery Volume 8500mAh 3 Working current Standby current 40uA 4.Detection Range: 8m, wireless transiting distance:500m HB T201 HB T205 HB T305 3 6Vlithum battery Volume 2 00mAh Alarming current 60mA 6 m, wireless transiting distance:500m Detection Angle: 4 (horizontal) 1 (perpendicular). Size 1 mmx8 mmx50mm Transmitting Frequency 433MHz FSK FHSS Transmitting time 5 seconds Working temperature -10- 55℃ How to program the solar pir detector?

Wireless FSK+FHSS alarming make sensor immune to signal-interference and false alarm. Strong anti-interference abiliyt to electromagnetic wave, strong light, small pets, which cut false alarm to the bottom. Solar charge Panel Voltage 5V 2.Standby battery 3 6Vlithum battery Volume 8500mAh 3 Working current Standby current 40uA 4.Detection Range: 8m, wireless transiting distance:500m HB T201 HB T205 HB T305 3 6Vlithum battery Volume 2 00mAh Alarming current 60mA 6 m, wireless transiting distance:500m Detection Angle: 4 (horizontal) 1 (perpendicular). Size 1 mmx8 mmx50mm Transmitting Frequency 433MHz FSK FHSS Transmitting time 5 seconds Working temperature -10- 55℃ How to program the solar pir detector?

Door magnetic contact wireless solar-powered indoor usage No need to change battery within 2-5 years. Very low standby current consumption FSK with hopping frequency wireless transmitting and no false alarm With self check and fault report function. Technology: solar panel: 5V working current:

Door magnetic contact wireless solar-powered indoor usage No need to change battery within 2-5 years. Very low standby current consumption FSK with hopping frequency wireless transmitting and no false alarm With self check and fault report function. Technology: solar panel: 5V working current:

Door magnetic contact wireless solar-powered indoor usage No need to change battery within 2-5 years. Very low standby current consumption FSK with hopping frequency wireless transmitting and no false alarm With self check and fault report function. Technology: solar panel: 5V working current:

Support NFPA 72 emergency evacuation signals in short buzz mode. Used alone or interconnected with other detectors (max. 40 sets) Photoelectric Smoke Detector Smoke Alarm Solar power wireless fire detector. Can be used with same brand HB wireless alarm control panel with more than 500 zones for wireless fire alarm system. 1. Photoelectric Detection Method 2. Ceiling Mounting 3. Optical Labyrinth 4. Low power consumption and long service life; 5. The detector is powered via solar without use of external source; 6. When detecting smoke exceeds the permissible limit, the detector will send out a local audible and visual alarm and send out wireless alarm signals to the host at the same time. 7. Low-voltage alarm; 8. Manual test function; 9. Avoid the sensor's drift problem; 10. Used alone or interconnected with other detectors (max. 40 sets); 11. Support NFPA 72 emergency evacuation signals in short buzz mode. 1. Sensor: Optical Cavity Labyrinth 2. Operating Voltage: 3.6V,2600mAH 3. Operating Current: Static Current: Less than 10uA; Alarm Current: 10-30mA; 4, Alarm Volume: 85dB at 10 ft; 5. Sensitivity to Smoke: Test value of 3.2% weak smoke per foot under ul217 Standard; 6. Wireless Transmitting Frequency: FM 433MHz; 7. Wireless Transmitting Distance: 100m (in open area); 8. Low-voltage Alarm: 2.2V±0.2 V; 9. Operating Environment: -10℃~50℃ 10. Monitoring Area: 20 m2;

Support NFPA 72 emergency evacuation signals in short buzz mode. Used alone or interconnected with other detectors (max. 40 sets) Photoelectric Smoke Detector Smoke Alarm Solar power wireless fire detector. Can be used with same brand HB wireless alarm control panel with more than 500 zones for wireless fire alarm system. 1. Photoelectric Detection Method 2. Ceiling Mounting 3. Optical Labyrinth 4. Low power consumption and long service life; 5. The detector is powered via solar without use of external source; 6. When detecting smoke exceeds the permissible limit, the detector will send out a local audible and visual alarm and send out wireless alarm signals to the host at the same time. 7. Low-voltage alarm; 8. Manual test function; 9. Avoid the sensor's drift problem; 10. Used alone or interconnected with other detectors (max. 40 sets); 11. Support NFPA 72 emergency evacuation signals in short buzz mode. 1. Sensor: Optical Cavity Labyrinth 2. Operating Voltage: 3.6V,2600mAH 3. Operating Current: Static Current: Less than 10uA; Alarm Current: 10-30mA; 4, Alarm Volume: 85dB at 10 ft; 5. Sensitivity to Smoke: Test value of 3.2% weak smoke per foot under ul217 Standard; 6. Wireless Transmitting Frequency: FM 433MHz; 7. Wireless Transmitting Distance: 100m (in open area); 8. Low-voltage Alarm: 2.2V±0.2 V; 9. Operating Environment: -10℃~50℃ 10. Monitoring Area: 20 m2;

Support NFPA 72 emergency evacuation signals in short buzz mode. Used alone or interconnected with other detectors (max. 40 sets) Photoelectric Smoke Detector Smoke Alarm Solar power wireless fire detector. Can be used with same brand HB wireless alarm control panel with more than 500 zones for wireless fire alarm system. 1. Photoelectric Detection Method 2. Ceiling Mounting 3. Optical Labyrinth 4. Low power consumption and long service life; 5. The detector is powered via solar without use of external source; 6. When detecting smoke exceeds the permissible limit, the detector will send out a local audible and visual alarm and send out wireless alarm signals to the host at the same time. 7. Low-voltage alarm; 8. Manual test function; 9. Avoid the sensor's drift problem; 10. Used alone or interconnected with other detectors (max. 40 sets); 11. Support NFPA 72 emergency evacuation signals in short buzz mode. 1. Sensor: Optical Cavity Labyrinth 2. Operating Voltage: 3.6V,2600mAH 3. Operating Current: Static Current: Less than 10uA; Alarm Current: 10-30mA; 4, Alarm Volume: 85dB at 10 ft; 5. Sensitivity to Smoke: Test value of 3.2% weak smoke per foot under ul217 Standard; 6. Wireless Transmitting Frequency: FM 433MHz; 7. Wireless Transmitting Distance: 100m (in open area); 8. Low-voltage Alarm: 2.2V±0.2 V; 9. Operating Environment: -10℃~50℃ 10. Monitoring Area: 20 m2;

HB-T205 Solar-Powered Wireless PIR Detecotor Used for drawing room，stair，lobby etc 1.Solar energy weakness light such as natural light, LED light charging design, no need of external power line, the design life is 10 years. 2.Standby current is as small as μA stage. 3.Strong anti-interference capability for disturbances of electromagnetic, strong light, small pets , low false alarm rate; 4. Sensitivity of sensor is adjustable, automatic temperature compensation; 5. Streamlined design, flexible and convenient installation, can be installed on wall, ceiling and etc. 6. Work with FM + FH signal , no need of external signal line 7. Use FM + FH signal , solve problem of the wireless signal is easy to be interference and wrong collection false alarm. 8. Has the function of fault self check, and report the fault to the host. Solar panels: 5V Emergency power supply: one 3.6V lithium battery Alarm current: ≤60mA Standby current: ≤40μA detecting angle: 100° Detecting distance:≥8m Wireless transmitting distance: ≥700m transmitting time:5s work environment temperature range:-10～+55℃ wireless transmitting frequency :433Mhz FH environment temperature range: -25～+65℃

HB-T205 Solar-Powered Wireless PIR Detecotor Used for drawing room，stair，lobby etc 1.Solar energy weakness light such as natural light, LED light charging design, no need of external power line, the design life is 10 years. 2.Standby current is as small as μA stage. 3.Strong anti-interference capability for disturbances of electromagnetic, strong light, small pets , low false alarm rate; 4. Sensitivity of sensor is adjustable, automatic temperature compensation; 5. Streamlined design, flexible and convenient installation, can be installed on wall, ceiling and etc. 6. Work with FM + FH signal , no need of external signal line 7. Use FM + FH signal , solve problem of the wireless signal is easy to be interference and wrong collection false alarm. 8. Has the function of fault self check, and report the fault to the host. Solar panels: 5V Emergency power supply: one 3.6V lithium battery Alarm current: ≤60mA Standby current: ≤40μA detecting angle: 100° Detecting distance:≥8m Wireless transmitting distance: ≥700m transmitting time:5s work environment temperature range:-10～+55℃ wireless transmitting frequency :433Mhz FH environment temperature range: -25～+65℃

HB-T205 Solar-Powered Wireless PIR Detecotor Used for drawing room，stair，lobby etc 1.Solar energy weakness light such as natural light, LED light charging design, no need of external power line, the design life is 10 years. 2.Standby current is as small as μA stage. 3.Strong anti-interference capability for disturbances of electromagnetic, strong light, small pets , low false alarm rate; 4. Sensitivity of sensor is adjustable, automatic temperature compensation; 5. Streamlined design, flexible and convenient installation, can be installed on wall, ceiling and etc. 6. Work with FM + FH signal , no need of external signal line 7. Use FM + FH signal , solve problem of the wireless signal is easy to be interference and wrong collection false alarm. 8. Has the function of fault self check, and report the fault to the host. Solar panels: 5V Emergency power supply: one 3.6V lithium battery Alarm current: ≤60mA Standby current: ≤40μA detecting angle: 100° Detecting distance:≥8m Wireless transmitting distance: ≥700m transmitting time:5s work environment temperature range:-10～+55℃ wireless transmitting frequency :433Mhz FH environment temperature range: -25～+65℃

easy to install Can be used with control panel WG820, WG868 etc. wireless fire alarm control panel Can be used with detectors to trigger alarm directly When a fire occurs, the alarm will trigger sound strong light alarm Technical parameter Working power：5V@1A Standby current：≤20mA Max current：≤250mA Alarm volume：≥80dbA Alarm band ：433MHz Size (mm): L:122 W:73 H:41

easy to install Can be used with control panel WG820, WG868 etc. wireless fire alarm control panel Can be used with detectors to trigger alarm directly When a fire occurs, the alarm will trigger sound strong light alarm Technical parameter Working power：5V@1A Standby current：≤20mA Max current：≤250mA Alarm volume：≥80dbA Alarm band ：433MHz Size (mm): L:122 W:73 H:41

easy to install Can be used with control panel WG820, WG868 etc. wireless fire alarm control panel Can be used with detectors to trigger alarm directly When a fire occurs, the alarm will trigger sound strong light alarm Technical parameter Working power：5V@1A Standby current：≤20mA Max current：≤250mA Alarm volume：≥80dbA Alarm band ：433MHz Size (mm): L:122 W:73 H:41

Sound strobe conventional sounder siren alarm DC24V SPECIFICATIONS Working voltage: 16VDC to 30VDC. Alarm Current: ≤ 50mA. Ambient temperature: -10℃ to +55℃. Ambient humidity: ≤95%RH. Sound level of alarm : ≥100dB. Flash Intensity: ≥75CD Flash Period: 40000times Dimensions: 133mm×115mm×50mm L ×W×D(With base) Weight: 141g

Sound strobe conventional sounder siren alarm DC24V SPECIFICATIONS Working voltage: 16VDC to 30VDC. Alarm Current: ≤ 50mA. Ambient temperature: -10℃ to +55℃. Ambient humidity: ≤95%RH. Sound level of alarm : ≥100dB. Flash Intensity: ≥75CD Flash Period: 40000times Dimensions: 133mm×115mm×50mm L ×W×D(With base) Weight: 141g

Sound strobe conventional sounder siren alarm DC24V SPECIFICATIONS Working voltage: 16VDC to 30VDC. Alarm Current: ≤ 50mA. Ambient temperature: -10℃ to +55℃. Ambient humidity: ≤95%RH. Sound level of alarm : ≥100dB. Flash Intensity: ≥75CD Flash Period: 40000times Dimensions: 133mm×115mm×50mm L ×W×D(With base) Weight: 141g

TCBM5023 addressable fire alarm system programmer for TC-5109 ▪ Contact-type encoding method ▪ Simplify encoding procedure, shorten encoding time, and reduce work intensity ▪ Complete encoding within a second ▪ Greatly improve the efficiency of the engineering commissioning ▪ Manual structure, compact appearance ▪ LCD and English display ▪ Battery management function Technical Specifications Power supply 1.5V/AA battery *2 Operating current ≤40mA Standby current ≤2mA (4mA when the backlight is on) Operating Environment Temperature: -10°C～+50°C,Relative Humidity: ≤95%, non-condensing Dimension (L×W×H):60mm×29mm×155mm Product installation manual and video at fire alarm

TCBM5023 addressable fire alarm system programmer for TC-5109 ▪ Contact-type encoding method ▪ Simplify encoding procedure, shorten encoding time, and reduce work intensity ▪ Complete encoding within a second ▪ Greatly improve the efficiency of the engineering commissioning ▪ Manual structure, compact appearance ▪ LCD and English display ▪ Battery management function Technical Specifications Power supply 1.5V/AA battery *2 Operating current ≤40mA Standby current ≤2mA (4mA when the backlight is on) Operating Environment Temperature: -10°C～+50°C,Relative Humidity: ≤95%, non-condensing Dimension (L×W×H):60mm×29mm×155mm Product installation manual and video at fire alarm

TCBM5023 addressable fire alarm system programmer for TC-5109 ▪ Contact-type encoding method ▪ Simplify encoding procedure, shorten encoding time, and reduce work intensity ▪ Complete encoding within a second ▪ Greatly improve the efficiency of the engineering commissioning ▪ Manual structure, compact appearance ▪ LCD and English display ▪ Battery management function Technical Specifications Power supply 1.5V/AA battery *2 Operating current ≤40mA Standby current ≤2mA (4mA when the backlight is on) Operating Environment Temperature: -10°C～+50°C,Relative Humidity: ≤95%, non-condensing Dimension (L×W×H):60mm×29mm×155mm Product installation manual and video at fire alarm