All Products

Alarm location display panel fire floor screen TCFS5089 TC brand LPCB approval professional intelligent addressable fire alarm system. Model No.: TCFS5089 It is used to display the fire location and related information of a certain floor or fire zone, and at the same time send out an sounder strobe alarm signals to inform people in nearby areas. * Display Fire Alarm position and information for certain floor or fire protection zone, give out audio and visual alarm signal to inform nearby personnel * Max 12 TCFS5089 Fire Display Panel per loop * Wiring: four bus system * Display range: any 512 alarm points within nearby 5 loops on its locating loop mainboard * English comment display * Dimension: 180mm× 110mm× 40mm Voltage Loop : DC24V(16V-28V); Power: DC24V(20V-28V) Current Standby Current: loop:≤1.1 mA, Power: < 9mA; Alarm Current: Loop: ≤2mA, Power:≤45mA Operating Environment Temperature: -10°C~+50°C; Relative Humidity:≤9 5%, non-condensing Wiring Four-wired Dimension (LxWxH) 180mmX 110mmx40mm (with base) Approval CCCF, CE

Alarm location display panel fire floor screen TCFS5089 TC brand LPCB approval professional intelligent addressable fire alarm system. Model No.: TCFS5089 It is used to display the fire location and related information of a certain floor or fire zone, and at the same time send out an sounder strobe alarm signals to inform people in nearby areas. * Display Fire Alarm position and information for certain floor or fire protection zone, give out audio and visual alarm signal to inform nearby personnel * Max 12 TCFS5089 Fire Display Panel per loop * Wiring: four bus system * Display range: any 512 alarm points within nearby 5 loops on its locating loop mainboard * English comment display * Dimension: 180mm× 110mm× 40mm Voltage Loop : DC24V(16V-28V); Power: DC24V(20V-28V) Current Standby Current: loop:≤1.1 mA, Power: < 9mA; Alarm Current: Loop: ≤2mA, Power:≤45mA Operating Environment Temperature: -10°C~+50°C; Relative Humidity:≤9 5%, non-condensing Wiring Four-wired Dimension (LxWxH) 180mmX 110mmx40mm (with base) Approval CCCF, CE

Alarm location display panel fire floor screen TCFS5089 TC brand LPCB approval professional intelligent addressable fire alarm system. Model No.: TCFS5089 It is used to display the fire location and related information of a certain floor or fire zone, and at the same time send out an sounder strobe alarm signals to inform people in nearby areas. * Display Fire Alarm position and information for certain floor or fire protection zone, give out audio and visual alarm signal to inform nearby personnel * Max 12 TCFS5089 Fire Display Panel per loop * Wiring: four bus system * Display range: any 512 alarm points within nearby 5 loops on its locating loop mainboard * English comment display * Dimension: 180mm× 110mm× 40mm Voltage Loop : DC24V(16V-28V); Power: DC24V(20V-28V) Current Standby Current: loop:≤1.1 mA, Power: < 9mA; Alarm Current: Loop: ≤2mA, Power:≤45mA Operating Environment Temperature: -10°C~+50°C; Relative Humidity:≤9 5%, non-condensing Wiring Four-wired Dimension (LxWxH) 180mmX 110mmx40mm (with base) Approval CCCF, CE

The automatic extinguisher control panel is designed in accordance with European standards EN54-2 and EN54-4 Fire Detection and Fire Alarm systems - Control and Indicating Equipment and EN12094-1 Fixed firefighting systems - Components for gas extinguishing systems Part 1: Requirements and test methods for electrical automatic control and delay devices. The control equipment is a combined fire alarm control panel and extinguishing system and has four detection zones, any or all of which are capable of contributing to the extinguisher release decision. Control panels have an integral, mains powered battery charger and power supply designed in accordance with the requirements of EN54-4. Technical specification Table 1 - Electrical specifications ITEM ELECTRICAL RATING COMMENT Size 383 mm W x 295 mm H x 87 mm D metal enclosure Weight 5 kg Mains supply 90 to 270VAC, 50Hz/60Hz Mains supply fuse 3 Amp ( F3A L250V) Replace only with similar type Power supply rating 3 Amps total including battery charge 28V +/- 2V Maximum ripple voltage ≤200 millivolts Battery type Two 12 Volt sealed lead acid in series. 7Ah maximum Battery charge voltage 27.6VDC nominal Battery charge current 0.7A maximum Current draw in mains fail condition 0.095 Amps With buzzer sounding Current draw in second stage alarm 0.235Amps Two zones in fire(470 ohm in circuit) Current draw in post discharge condition 0.310Amps solenoid outputs active Maximum current draw from batteries 3Amps With main power disconnected NAC outputs(sounder & bell circuit) 26 to 28V DC Fused at 500mA with electronic fuse 1.2Amp total load over all circuits Fault relay contact rating 2A /30VDC maximum for each Volt free changeover contact Fire relay contact rating 2A /30VDC maximum for each Volt free changeover contact First stage contact rating 2A /30VDC maximum for each Volt free changeover contact Second stage contact rating 2A /30VDC maximum for each Volt free changeover contact Extract contact rating 2A /30VDC maximum for each Volt free changeover contact Zone quiescent current 4mA maximum Terminal capacity 0.5mm2 to 2.5mm2 solid or stranded wire Number of detectors per zone ≤30 PCS conventional detectors Number of sounders per circuit Dependent on type and current consumption Detection circuit end of line 4K7±5% 1/2 Watt resistor 3K-5.6K 1/2W Monitored input end of line 4K7±5% 1/2 Watt resistor 3K-5.6K 1/2W Sounder circuit end of line 10K±5% 1/2 Watt resistor 6.8K-20K 1/2W Extinguishant output end of line 10K±5% 1/2 Watt resistor 6.8K-20K 1/2W No. of detection circuits Four 21 to 28V DC No. of sounder circuits Four 21 to 28V DC Extinguishant release output 21V to 28V DC. Maximum load 2 Amp Extinguishant release delay time Adjustable 0 to 75 seconds 5 second steps SIL, AL, FLT, RST inputs Switched – min resistance 0 ohms, max 1k ohms Detector alarm threshold 270 ohms to 1K ohms Call point alarm threshold 150 ohms to 1K ohms Short circuit threshold 0 ohms to 130 ohms Status unit/Ancillary board connection Two wire RS485 connection with electronic fuse. Max. of 32 units-RS485 data cable The controller is connected with Conventional Smoke Detector, heat Detector, Manual call point, on-site emergency start/stop button, aerosol extinguishing control device (or cylinder control device), weighing device, exhaust indicator light and other equipment. Constitute a complete automatic fire alarm and fire fighting system. Download manual and diagram for fire alarm and fire fighting system. Conventional Fire Fighting Panel Key Specifications/Special Features Four Style B（Class B）Initiating Device Circuits（IDCs）。 All zones accept two-wire smoke detectors and any normally-open contact devices. One built-in Fire Fighting Ouput. 24-volt operation. Resettable four-wire smoke detector power＠500 mA. Non-resettable power＠500 mA. One-man walk-test programmable for silent or audible test. Disable/Enable control per IDC. Reverse polarity protection There are 6 buttons on the panel, Emergency evacuation, external muffler, Self-test/Reset, Internal muffler, exhaust fan, Emergency Stop Control lock allows and disables key function, manual and automatic switching modes The standby 12V/4.5A power supply is placed at the bottom of the chassis. If the battery polarity is incorrect, the yellow battery fault message is displayed on the panel. Emergency gas release: Pull out the yellow plastic box panel on the panel, and there is a red button inside. Press the button, the controller will enter the "emergency start" delay state, showing a countdown of 10 seconds, and send a start signal after the countdown is over. L Controller has 4 independent alarm area (ZONE1-ZONE4), can be connected with multi-line smoke, temperature, manual alarm Button and other input equipment, can independently complete equipment fault detection and alarm function. L The controller has three sound and light alarm outputs (SounD1-SOUND3), which can be easily used for external emergency alarm in case of fire . L the controller has one 24VDC/1A POWER output (power-24 v,0V) to supply POWER to external devices. L Controller has 1 way fault, 1 way fire alarm relay output. L The controller has remote mute, remote alarm test, remote fault test and remote reset functions. L The controller has remote emergency start, remote emergency stop and remote hand/automatic mode switching functions. L The controller has cylinder pressure undervoltage signal receiving function and gas release feedback signal receiving function. L The controller has valve function. L The controller can set 0-75s delay valve function. L The controller has the function of manually opening and closing the exhaust fan. L The controller has RS485 interface, which can transmit alarm information with the upper computer or the floor repeat display. 2. Technical indicators Remarks of electrical parameters of the project Working power supply DC12V-DC28V Ripple voltage is 200 mV The static current is 0.12A The alarm current is 0.235A The output current is 24/3a Relay output contact capacity 24V/2A, 220V/1A Acoustic and optical output power of each channel 24V/1A (Max) Static currents in alarm zone (Zone1-4) 0mAminimum, 2mAmaximum A twisted pair cable with a lead of 0.75mm2 to 2.5mm2 is recommended The number of detectors in each alarm zone (ZONE1-4) is 25 Detector, monitor input terminal resistance 6K8±5% 1/2W Acousto-optic alarm output terminal resistance 10K±5% 1/2W Controller alarm area (ZONE1-ZONE4) alarm resistance 1K - 390 Parallel diodes 1N4004 or 1N4007 are recommended for valve output Zone1-zone4: input alarm equipment for multi-wire smoke sensing, temperature sensing, manual alarm button, etc. ZONE1 and ZONE2 participate Linkage "and" control output, ZONE3 and ZONE4 only alarm function, do not participate in linkage control output. It is recommended that ZONE1 be connected to multiple cables - type smoke detector, ZONE2 connected with multi - line temperature detector. When both ZONE1 and ZONE2 alarm, the controller will enter the linkage loss Out (The controller is in automatic state) state Fire alarm and automatic fire control must be installed in communication room, warehouse, factory.

The automatic extinguisher control panel is designed in accordance with European standards EN54-2 and EN54-4 Fire Detection and Fire Alarm systems - Control and Indicating Equipment and EN12094-1 Fixed firefighting systems - Components for gas extinguishing systems Part 1: Requirements and test methods for electrical automatic control and delay devices. The control equipment is a combined fire alarm control panel and extinguishing system and has four detection zones, any or all of which are capable of contributing to the extinguisher release decision. Control panels have an integral, mains powered battery charger and power supply designed in accordance with the requirements of EN54-4. Technical specification Table 1 - Electrical specifications ITEM ELECTRICAL RATING COMMENT Size 383 mm W x 295 mm H x 87 mm D metal enclosure Weight 5 kg Mains supply 90 to 270VAC, 50Hz/60Hz Mains supply fuse 3 Amp ( F3A L250V) Replace only with similar type Power supply rating 3 Amps total including battery charge 28V +/- 2V Maximum ripple voltage ≤200 millivolts Battery type Two 12 Volt sealed lead acid in series. 7Ah maximum Battery charge voltage 27.6VDC nominal Battery charge current 0.7A maximum Current draw in mains fail condition 0.095 Amps With buzzer sounding Current draw in second stage alarm 0.235Amps Two zones in fire(470 ohm in circuit) Current draw in post discharge condition 0.310Amps solenoid outputs active Maximum current draw from batteries 3Amps With main power disconnected NAC outputs(sounder & bell circuit) 26 to 28V DC Fused at 500mA with electronic fuse 1.2Amp total load over all circuits Fault relay contact rating 2A /30VDC maximum for each Volt free changeover contact Fire relay contact rating 2A /30VDC maximum for each Volt free changeover contact First stage contact rating 2A /30VDC maximum for each Volt free changeover contact Second stage contact rating 2A /30VDC maximum for each Volt free changeover contact Extract contact rating 2A /30VDC maximum for each Volt free changeover contact Zone quiescent current 4mA maximum Terminal capacity 0.5mm2 to 2.5mm2 solid or stranded wire Number of detectors per zone ≤30 PCS conventional detectors Number of sounders per circuit Dependent on type and current consumption Detection circuit end of line 4K7±5% 1/2 Watt resistor 3K-5.6K 1/2W Monitored input end of line 4K7±5% 1/2 Watt resistor 3K-5.6K 1/2W Sounder circuit end of line 10K±5% 1/2 Watt resistor 6.8K-20K 1/2W Extinguishant output end of line 10K±5% 1/2 Watt resistor 6.8K-20K 1/2W No. of detection circuits Four 21 to 28V DC No. of sounder circuits Four 21 to 28V DC Extinguishant release output 21V to 28V DC. Maximum load 2 Amp Extinguishant release delay time Adjustable 0 to 75 seconds 5 second steps SIL, AL, FLT, RST inputs Switched – min resistance 0 ohms, max 1k ohms Detector alarm threshold 270 ohms to 1K ohms Call point alarm threshold 150 ohms to 1K ohms Short circuit threshold 0 ohms to 130 ohms Status unit/Ancillary board connection Two wire RS485 connection with electronic fuse. Max. of 32 units-RS485 data cable The controller is connected with Conventional Smoke Detector, heat Detector, Manual call point, on-site emergency start/stop button, aerosol extinguishing control device (or cylinder control device), weighing device, exhaust indicator light and other equipment. Constitute a complete automatic fire alarm and fire fighting system. Download manual and diagram for fire alarm and fire fighting system. Conventional Fire Fighting Panel Key Specifications/Special Features Four Style B（Class B）Initiating Device Circuits（IDCs）。 All zones accept two-wire smoke detectors and any normally-open contact devices. One built-in Fire Fighting Ouput. 24-volt operation. Resettable four-wire smoke detector power＠500 mA. Non-resettable power＠500 mA. One-man walk-test programmable for silent or audible test. Disable/Enable control per IDC. Reverse polarity protection There are 6 buttons on the panel, Emergency evacuation, external muffler, Self-test/Reset, Internal muffler, exhaust fan, Emergency Stop Control lock allows and disables key function, manual and automatic switching modes The standby 12V/4.5A power supply is placed at the bottom of the chassis. If the battery polarity is incorrect, the yellow battery fault message is displayed on the panel. Emergency gas release: Pull out the yellow plastic box panel on the panel, and there is a red button inside. Press the button, the controller will enter the "emergency start" delay state, showing a countdown of 10 seconds, and send a start signal after the countdown is over. L Controller has 4 independent alarm area (ZONE1-ZONE4), can be connected with multi-line smoke, temperature, manual alarm Button and other input equipment, can independently complete equipment fault detection and alarm function. L The controller has three sound and light alarm outputs (SounD1-SOUND3), which can be easily used for external emergency alarm in case of fire . L the controller has one 24VDC/1A POWER output (power-24 v,0V) to supply POWER to external devices. L Controller has 1 way fault, 1 way fire alarm relay output. L The controller has remote mute, remote alarm test, remote fault test and remote reset functions. L The controller has remote emergency start, remote emergency stop and remote hand/automatic mode switching functions. L The controller has cylinder pressure undervoltage signal receiving function and gas release feedback signal receiving function. L The controller has valve function. L The controller can set 0-75s delay valve function. L The controller has the function of manually opening and closing the exhaust fan. L The controller has RS485 interface, which can transmit alarm information with the upper computer or the floor repeat display. 2. Technical indicators Remarks of electrical parameters of the project Working power supply DC12V-DC28V Ripple voltage is 200 mV The static current is 0.12A The alarm current is 0.235A The output current is 24/3a Relay output contact capacity 24V/2A, 220V/1A Acoustic and optical output power of each channel 24V/1A (Max) Static currents in alarm zone (Zone1-4) 0mAminimum, 2mAmaximum A twisted pair cable with a lead of 0.75mm2 to 2.5mm2 is recommended The number of detectors in each alarm zone (ZONE1-4) is 25 Detector, monitor input terminal resistance 6K8±5% 1/2W Acousto-optic alarm output terminal resistance 10K±5% 1/2W Controller alarm area (ZONE1-ZONE4) alarm resistance 1K - 390 Parallel diodes 1N4004 or 1N4007 are recommended for valve output Zone1-zone4: input alarm equipment for multi-wire smoke sensing, temperature sensing, manual alarm button, etc. ZONE1 and ZONE2 participate Linkage "and" control output, ZONE3 and ZONE4 only alarm function, do not participate in linkage control output. It is recommended that ZONE1 be connected to multiple cables - type smoke detector, ZONE2 connected with multi - line temperature detector. When both ZONE1 and ZONE2 alarm, the controller will enter the linkage loss Out (The controller is in automatic state) state Fire alarm and automatic fire control must be installed in communication room, warehouse, factory.

The automatic extinguisher control panel is designed in accordance with European standards EN54-2 and EN54-4 Fire Detection and Fire Alarm systems - Control and Indicating Equipment and EN12094-1 Fixed firefighting systems - Components for gas extinguishing systems Part 1: Requirements and test methods for electrical automatic control and delay devices. The control equipment is a combined fire alarm control panel and extinguishing system and has four detection zones, any or all of which are capable of contributing to the extinguisher release decision. Control panels have an integral, mains powered battery charger and power supply designed in accordance with the requirements of EN54-4. Technical specification Table 1 - Electrical specifications ITEM ELECTRICAL RATING COMMENT Size 383 mm W x 295 mm H x 87 mm D metal enclosure Weight 5 kg Mains supply 90 to 270VAC, 50Hz/60Hz Mains supply fuse 3 Amp ( F3A L250V) Replace only with similar type Power supply rating 3 Amps total including battery charge 28V +/- 2V Maximum ripple voltage ≤200 millivolts Battery type Two 12 Volt sealed lead acid in series. 7Ah maximum Battery charge voltage 27.6VDC nominal Battery charge current 0.7A maximum Current draw in mains fail condition 0.095 Amps With buzzer sounding Current draw in second stage alarm 0.235Amps Two zones in fire(470 ohm in circuit) Current draw in post discharge condition 0.310Amps solenoid outputs active Maximum current draw from batteries 3Amps With main power disconnected NAC outputs(sounder & bell circuit) 26 to 28V DC Fused at 500mA with electronic fuse 1.2Amp total load over all circuits Fault relay contact rating 2A /30VDC maximum for each Volt free changeover contact Fire relay contact rating 2A /30VDC maximum for each Volt free changeover contact First stage contact rating 2A /30VDC maximum for each Volt free changeover contact Second stage contact rating 2A /30VDC maximum for each Volt free changeover contact Extract contact rating 2A /30VDC maximum for each Volt free changeover contact Zone quiescent current 4mA maximum Terminal capacity 0.5mm2 to 2.5mm2 solid or stranded wire Number of detectors per zone ≤30 PCS conventional detectors Number of sounders per circuit Dependent on type and current consumption Detection circuit end of line 4K7±5% 1/2 Watt resistor 3K-5.6K 1/2W Monitored input end of line 4K7±5% 1/2 Watt resistor 3K-5.6K 1/2W Sounder circuit end of line 10K±5% 1/2 Watt resistor 6.8K-20K 1/2W Extinguishant output end of line 10K±5% 1/2 Watt resistor 6.8K-20K 1/2W No. of detection circuits Four 21 to 28V DC No. of sounder circuits Four 21 to 28V DC Extinguishant release output 21V to 28V DC. Maximum load 2 Amp Extinguishant release delay time Adjustable 0 to 75 seconds 5 second steps SIL, AL, FLT, RST inputs Switched – min resistance 0 ohms, max 1k ohms Detector alarm threshold 270 ohms to 1K ohms Call point alarm threshold 150 ohms to 1K ohms Short circuit threshold 0 ohms to 130 ohms Status unit/Ancillary board connection Two wire RS485 connection with electronic fuse. Max. of 32 units-RS485 data cable The controller is connected with Conventional Smoke Detector, heat Detector, Manual call point, on-site emergency start/stop button, aerosol extinguishing control device (or cylinder control device), weighing device, exhaust indicator light and other equipment. Constitute a complete automatic fire alarm and fire fighting system. Download manual and diagram for fire alarm and fire fighting system. Conventional Fire Fighting Panel Key Specifications/Special Features Four Style B（Class B）Initiating Device Circuits（IDCs）。 All zones accept two-wire smoke detectors and any normally-open contact devices. One built-in Fire Fighting Ouput. 24-volt operation. Resettable four-wire smoke detector power＠500 mA. Non-resettable power＠500 mA. One-man walk-test programmable for silent or audible test. Disable/Enable control per IDC. Reverse polarity protection There are 6 buttons on the panel, Emergency evacuation, external muffler, Self-test/Reset, Internal muffler, exhaust fan, Emergency Stop Control lock allows and disables key function, manual and automatic switching modes The standby 12V/4.5A power supply is placed at the bottom of the chassis. If the battery polarity is incorrect, the yellow battery fault message is displayed on the panel. Emergency gas release: Pull out the yellow plastic box panel on the panel, and there is a red button inside. Press the button, the controller will enter the "emergency start" delay state, showing a countdown of 10 seconds, and send a start signal after the countdown is over. L Controller has 4 independent alarm area (ZONE1-ZONE4), can be connected with multi-line smoke, temperature, manual alarm Button and other input equipment, can independently complete equipment fault detection and alarm function. L The controller has three sound and light alarm outputs (SounD1-SOUND3), which can be easily used for external emergency alarm in case of fire . L the controller has one 24VDC/1A POWER output (power-24 v,0V) to supply POWER to external devices. L Controller has 1 way fault, 1 way fire alarm relay output. L The controller has remote mute, remote alarm test, remote fault test and remote reset functions. L The controller has remote emergency start, remote emergency stop and remote hand/automatic mode switching functions. L The controller has cylinder pressure undervoltage signal receiving function and gas release feedback signal receiving function. L The controller has valve function. L The controller can set 0-75s delay valve function. L The controller has the function of manually opening and closing the exhaust fan. L The controller has RS485 interface, which can transmit alarm information with the upper computer or the floor repeat display. 2. Technical indicators Remarks of electrical parameters of the project Working power supply DC12V-DC28V Ripple voltage is 200 mV The static current is 0.12A The alarm current is 0.235A The output current is 24/3a Relay output contact capacity 24V/2A, 220V/1A Acoustic and optical output power of each channel 24V/1A (Max) Static currents in alarm zone (Zone1-4) 0mAminimum, 2mAmaximum A twisted pair cable with a lead of 0.75mm2 to 2.5mm2 is recommended The number of detectors in each alarm zone (ZONE1-4) is 25 Detector, monitor input terminal resistance 6K8±5% 1/2W Acousto-optic alarm output terminal resistance 10K±5% 1/2W Controller alarm area (ZONE1-ZONE4) alarm resistance 1K - 390 Parallel diodes 1N4004 or 1N4007 are recommended for valve output Zone1-zone4: input alarm equipment for multi-wire smoke sensing, temperature sensing, manual alarm button, etc. ZONE1 and ZONE2 participate Linkage "and" control output, ZONE3 and ZONE4 only alarm function, do not participate in linkage control output. It is recommended that ZONE1 be connected to multiple cables - type smoke detector, ZONE2 connected with multi - line temperature detector. When both ZONE1 and ZONE2 alarm, the controller will enter the linkage loss Out (The controller is in automatic state) state Fire alarm and automatic fire control must be installed in communication room, warehouse, factory.

The TX7140 Intelligent Manual Call point use a non-breakable glass which is designed to press under light pressure triggering the call point into an alarm condition, with LED indicator mounted onto the front face to simplify the location of an operated call point. Safe to press and no hammer is required. The protected flap on the lower part is used for reset through supplied special tool.

The TX7140 Intelligent Manual Call point use a non-breakable glass which is designed to press under light pressure triggering the call point into an alarm condition, with LED indicator mounted onto the front face to simplify the location of an operated call point. Safe to press and no hammer is required. The protected flap on the lower part is used for reset through supplied special tool.

The TX7140 Intelligent Manual Call point use a non-breakable glass which is designed to press under light pressure triggering the call point into an alarm condition, with LED indicator mounted onto the front face to simplify the location of an operated call point. Safe to press and no hammer is required. The protected flap on the lower part is used for reset through supplied special tool.

No wiring, easy to install Intelligent control, stable and reliable Exclusive agreement, strong anti-interference A battery effectively work more than 5 years Can be used with the wireless fire control panel Package: Alarm button x1 Reset key x1 Manual x1 Technical Parameter Temperature:-10~45℃ Relative humidity:≤95% Working power:3.6VDC Standby current:≤8µA Alarm current:≤20mA Transmission power:≥7dbm Size (mm): L:85 W:85 H:40

No wiring, easy to install Intelligent control, stable and reliable Exclusive agreement, strong anti-interference A battery effectively work more than 5 years Can be used with the wireless fire control panel Package: Alarm button x1 Reset key x1 Manual x1 Technical Parameter Temperature:-10~45℃ Relative humidity:≤95% Working power:3.6VDC Standby current:≤8µA Alarm current:≤20mA Transmission power:≥7dbm Size (mm): L:85 W:85 H:40

No wiring, easy to install Intelligent control, stable and reliable Exclusive agreement, strong anti-interference A battery effectively work more than 5 years Can be used with the wireless fire control panel Package: Alarm button x1 Reset key x1 Manual x1 Technical Parameter Temperature:-10~45℃ Relative humidity:≤95% Working power:3.6VDC Standby current:≤8µA Alarm current:≤20mA Transmission power:≥7dbm Size (mm): L:85 W:85 H:40

TCMK5269 Dual Input Module is used to receive normally open or normally closed switch signal input by fire linkage equipment, and transmit linkage information back to Fire Alarm controller (linkage type TC5109). It is mainly used to connect various active equipment such as water flow indicator, pressure switch, position switch, signal valve and external linkage equipment which can send back switch signal, etc. After the operation of these devices, the output action signals can be sent by the module to the fire alarm controller through the signal bus to generate an alarm, and the fire alarm controller can be used to linkage the actions of other related devices. Characteristics 1. The module has two input terminals, respectively input 1 and input 2, respectively corresponding to two addresses; 2. The input line has the function of checking the line, and when the line breaks down, the fault information will be reported； 3. The address code is electronic code, which can be written in advance by the electronic encoder, so the engineering debugging is simple and reliable. 4. Using microprocessor to realize signal processing, using digital signal to communicate with the controller, the work is stable and reliable, and has a good ability to restrain electromagnetic interference Compatible LPCB Addressable Fire Alarm Systems.

TCMK5269 Dual Input Module is used to receive normally open or normally closed switch signal input by fire linkage equipment, and transmit linkage information back to Fire Alarm controller (linkage type TC5109). It is mainly used to connect various active equipment such as water flow indicator, pressure switch, position switch, signal valve and external linkage equipment which can send back switch signal, etc. After the operation of these devices, the output action signals can be sent by the module to the fire alarm controller through the signal bus to generate an alarm, and the fire alarm controller can be used to linkage the actions of other related devices. Characteristics 1. The module has two input terminals, respectively input 1 and input 2, respectively corresponding to two addresses; 2. The input line has the function of checking the line, and when the line breaks down, the fault information will be reported； 3. The address code is electronic code, which can be written in advance by the electronic encoder, so the engineering debugging is simple and reliable. 4. Using microprocessor to realize signal processing, using digital signal to communicate with the controller, the work is stable and reliable, and has a good ability to restrain electromagnetic interference Compatible LPCB Addressable Fire Alarm Systems.

TCMK5269 Dual Input Module is used to receive normally open or normally closed switch signal input by fire linkage equipment, and transmit linkage information back to Fire Alarm controller (linkage type TC5109). It is mainly used to connect various active equipment such as water flow indicator, pressure switch, position switch, signal valve and external linkage equipment which can send back switch signal, etc. After the operation of these devices, the output action signals can be sent by the module to the fire alarm controller through the signal bus to generate an alarm, and the fire alarm controller can be used to linkage the actions of other related devices. Characteristics 1. The module has two input terminals, respectively input 1 and input 2, respectively corresponding to two addresses; 2. The input line has the function of checking the line, and when the line breaks down, the fault information will be reported； 3. The address code is electronic code, which can be written in advance by the electronic encoder, so the engineering debugging is simple and reliable. 4. Using microprocessor to realize signal processing, using digital signal to communicate with the controller, the work is stable and reliable, and has a good ability to restrain electromagnetic interference Compatible LPCB Addressable Fire Alarm Systems.

TCDZ517S Sounder base is mainly used in fire alarm systems that require bus-connection. After encoding, it can be used in conjunction with fire alarm smoke detectors and heat detectors. (Compatible with TC5161 and TC5162 and TC5163) When the on-site detection equipment issues an alarm, the sound base can be linked for sound output, prompting the on-site staff to pay attention, so as to better control the on-site situation. TCDZ 517S Sounder Base characteristic: 1.Two-wire connection with external equipment, convenient on-site wiring; 2.The address is set by electronic coding, no dial switch is needed, and the airtightness is increased in the structure; 3.Use microprocessor to realize signal processing, and use digital signal to communicatewith controller, work stably and reliably, and have a good ability to suppress electromag. Specification: Rated working voltage: DC24V Working current: monitoring current ≤0.18mA starting current ≤5.5mA Sound pressure level: 65dB ~ 115dB (A weighting) Coding method: electronic coding method, occupying a bus coding point, the coding range can be set arbitrarily between 1 and 255 Reset method: controller reset Use environment: Indoor atmospheric pressure: 86kPa~ 106kPa Temperature: 0℃~+50℃ Relative humidity ≤95%, non-condensing Shell material and color: ABS, milky white Pitch shift periodic: Φ110mm×29mm Sound type Sound pressure level: 3.5s~4.5s/0.1s~0.4s

TCDZ517S Sounder base is mainly used in fire alarm systems that require bus-connection. After encoding, it can be used in conjunction with fire alarm smoke detectors and heat detectors. (Compatible with TC5161 and TC5162 and TC5163) When the on-site detection equipment issues an alarm, the sound base can be linked for sound output, prompting the on-site staff to pay attention, so as to better control the on-site situation. TCDZ 517S Sounder Base characteristic: 1.Two-wire connection with external equipment, convenient on-site wiring; 2.The address is set by electronic coding, no dial switch is needed, and the airtightness is increased in the structure; 3.Use microprocessor to realize signal processing, and use digital signal to communicatewith controller, work stably and reliably, and have a good ability to suppress electromag. Specification: Rated working voltage: DC24V Working current: monitoring current ≤0.18mA starting current ≤5.5mA Sound pressure level: 65dB ~ 115dB (A weighting) Coding method: electronic coding method, occupying a bus coding point, the coding range can be set arbitrarily between 1 and 255 Reset method: controller reset Use environment: Indoor atmospheric pressure: 86kPa~ 106kPa Temperature: 0℃~+50℃ Relative humidity ≤95%, non-condensing Shell material and color: ABS, milky white Pitch shift periodic: Φ110mm×29mm Sound type Sound pressure level: 3.5s~4.5s/0.1s~0.4s

TCDZ517S Sounder base is mainly used in fire alarm systems that require bus-connection. After encoding, it can be used in conjunction with fire alarm smoke detectors and heat detectors. (Compatible with TC5161 and TC5162 and TC5163) When the on-site detection equipment issues an alarm, the sound base can be linked for sound output, prompting the on-site staff to pay attention, so as to better control the on-site situation. TCDZ 517S Sounder Base characteristic: 1.Two-wire connection with external equipment, convenient on-site wiring; 2.The address is set by electronic coding, no dial switch is needed, and the airtightness is increased in the structure; 3.Use microprocessor to realize signal processing, and use digital signal to communicatewith controller, work stably and reliably, and have a good ability to suppress electromag. Specification: Rated working voltage: DC24V Working current: monitoring current ≤0.18mA starting current ≤5.5mA Sound pressure level: 65dB ~ 115dB (A weighting) Coding method: electronic coding method, occupying a bus coding point, the coding range can be set arbitrarily between 1 and 255 Reset method: controller reset Use environment: Indoor atmospheric pressure: 86kPa~ 106kPa Temperature: 0℃~+50℃ Relative humidity ≤95%, non-condensing Shell material and color: ABS, milky white Pitch shift periodic: Φ110mm×29mm Sound type Sound pressure level: 3.5s~4.5s/0.1s~0.4s

Outdoor sound flash light alarm. Suitable for patrol, fire, medical and so on. The alarm sound is strong, can obtain the visual and auditory shock effect with the low voltage and low power input. Product technical parameters 1. Working voltage: DC12-30V 2. Working current: ≤40mA 3. Working environment: -20℃ ~ +60℃ 4. Relative humidity: 0%~95%RH 5. Sound intensity: greater than or equal to 105dB (at a distance of one meter) 6. Product weight: 360g net weight 7. Flash intensity: greater than or equal to 1.2WS More details and complete fire alarm system category can be found at fire alarm

Outdoor sound flash light alarm. Suitable for patrol, fire, medical and so on. The alarm sound is strong, can obtain the visual and auditory shock effect with the low voltage and low power input. Product technical parameters 1. Working voltage: DC12-30V 2. Working current: ≤40mA 3. Working environment: -20℃ ~ +60℃ 4. Relative humidity: 0%~95%RH 5. Sound intensity: greater than or equal to 105dB (at a distance of one meter) 6. Product weight: 360g net weight 7. Flash intensity: greater than or equal to 1.2WS More details and complete fire alarm system category can be found at fire alarm

Outdoor sound flash light alarm. Suitable for patrol, fire, medical and so on. The alarm sound is strong, can obtain the visual and auditory shock effect with the low voltage and low power input. Product technical parameters 1. Working voltage: DC12-30V 2. Working current: ≤40mA 3. Working environment: -20℃ ~ +60℃ 4. Relative humidity: 0%~95%RH 5. Sound intensity: greater than or equal to 105dB (at a distance of one meter) 6. Product weight: 360g net weight 7. Flash intensity: greater than or equal to 1.2WS More details and complete fire alarm system category can be found at fire alarm

1. Zone Monitoring Interface Description: TCMK5271 is mainly used to connect external multi-wire conventional detectors to the loop signal bus. It is used to monitor the status of external multi-line equipment and transmit its status to the control panel through the bus. When any detector in the loop sends an alarm signal, the area monitoring interface receives the information and uploads it to the control panel. 2. TCMK 5271 Zone Monitoring Interface Features: It has the function of detecting the wiring fault of external multi-line equipment;  The address code is electronically coded, which can be written in advance by the electronic encoder, and the engineering debugging is simple and reliable. Wall-mounted, small size. 3. Specification: Operating voltage: Rated working voltage of signal bus: bus 24V range: DC16V~DC28V Power supply rated working voltage: DC24V range: DC20V~DC28V Operating current: Bus monitoring current ≤0.25mA Bus starting current ≤ 0.8ma. Monitoring current of power supply ≤10mA and starting current of power supply ≤25mA Output capacity: each interface can have up to 30 detectors. Indicator light: red, fire alarm light, shining during patrol inspection, and always on. Yellow, fault light, always on. Coding mode: electronic coding mode, occupying one bus coding point, and the coding range can set between 1 and 255. Wire: Connect with the signal bus 2-wire of the control panel and the power line Environment: Temperature:-10℃ ~+55℃ Relative humidity ≤95%, non-condensing. Overall dimensions: 86mm×86mm×40mm (with bottom shell) Material and color: ABS, porcelain white Weight: about 300g Installation hole distance: 60mm

1. Zone Monitoring Interface Description: TCMK5271 is mainly used to connect external multi-wire conventional detectors to the loop signal bus. It is used to monitor the status of external multi-line equipment and transmit its status to the control panel through the bus. When any detector in the loop sends an alarm signal, the area monitoring interface receives the information and uploads it to the control panel. 2. TCMK 5271 Zone Monitoring Interface Features: It has the function of detecting the wiring fault of external multi-line equipment;  The address code is electronically coded, which can be written in advance by the electronic encoder, and the engineering debugging is simple and reliable. Wall-mounted, small size. 3. Specification: Operating voltage: Rated working voltage of signal bus: bus 24V range: DC16V~DC28V Power supply rated working voltage: DC24V range: DC20V~DC28V Operating current: Bus monitoring current ≤0.25mA Bus starting current ≤ 0.8ma. Monitoring current of power supply ≤10mA and starting current of power supply ≤25mA Output capacity: each interface can have up to 30 detectors. Indicator light: red, fire alarm light, shining during patrol inspection, and always on. Yellow, fault light, always on. Coding mode: electronic coding mode, occupying one bus coding point, and the coding range can set between 1 and 255. Wire: Connect with the signal bus 2-wire of the control panel and the power line Environment: Temperature:-10℃ ~+55℃ Relative humidity ≤95%, non-condensing. Overall dimensions: 86mm×86mm×40mm (with bottom shell) Material and color: ABS, porcelain white Weight: about 300g Installation hole distance: 60mm

1. Zone Monitoring Interface Description: TCMK5271 is mainly used to connect external multi-wire conventional detectors to the loop signal bus. It is used to monitor the status of external multi-line equipment and transmit its status to the control panel through the bus. When any detector in the loop sends an alarm signal, the area monitoring interface receives the information and uploads it to the control panel. 2. TCMK 5271 Zone Monitoring Interface Features: It has the function of detecting the wiring fault of external multi-line equipment;  The address code is electronically coded, which can be written in advance by the electronic encoder, and the engineering debugging is simple and reliable. Wall-mounted, small size. 3. Specification: Operating voltage: Rated working voltage of signal bus: bus 24V range: DC16V~DC28V Power supply rated working voltage: DC24V range: DC20V~DC28V Operating current: Bus monitoring current ≤0.25mA Bus starting current ≤ 0.8ma. Monitoring current of power supply ≤10mA and starting current of power supply ≤25mA Output capacity: each interface can have up to 30 detectors. Indicator light: red, fire alarm light, shining during patrol inspection, and always on. Yellow, fault light, always on. Coding mode: electronic coding mode, occupying one bus coding point, and the coding range can set between 1 and 255. Wire: Connect with the signal bus 2-wire of the control panel and the power line Environment: Temperature:-10℃ ~+55℃ Relative humidity ≤95%, non-condensing. Overall dimensions: 86mm×86mm×40mm (with bottom shell) Material and color: ABS, porcelain white Weight: about 300g Installation hole distance: 60mm

Fences, gardens, swimming pools, golf courses etc. outdoor property large open land security equipment. Solar power LED light with wireless photoelectric beam sensor for intrusion detection and alarm. The garden light LED will light on automatically at night and light off at day time. The LED light can continue work for about 5 days at cloudy days or rainy days. The 8-beams photoelectric IR detector inside the garden light pole works 24 hours to keep illegal intrusion outside. If there is intrusion entering into the blocked area, it will trigger sound alarm and send wireless alarm signal to remote receiver. Solar-Power garden light wall is ideal security equipment and lighting device for garden, golf courses, swimming pools. The solar panel will charge the IR beam firstly, then charge the garden LED light. It can work for about 10 years of battery life time. If change battery, it can continue working. Technical Parameters Infrared Detection Range 50m Wireless Transmission Range 700m Beam Quantity 8 Wireless Frequency 433MHz FSK+FHSS Maximum Trigger Number In 24 Hours ≤200 times Working Voltage 3.3V Battery Type Chargeable LiFePO4 Battery Battery Capacity 6000mAh LED Power Consumption 1 W Infrared Wavelength 940nm±20nm Solar Panel Power Capability 2W Working Duration Solar charged for 8-12hours, Garden light can work 20hours continuously Barriers can work normally all the time no matter for rainy day or sunny days ) Working Temperature Range -30℃~70℃ Weight 17kg HB-T002A8：4.3kg Dimension 1400×φ150（mm） Solar&Wireless 8 Beam Barrier+Garden light Features: Battery Powered&Solar Charged,no need cables. Garden Lights turn on automatically at night and turn off automatically at day time. Multiple Detection Beams(to avoid false alarm--such as small pets). Dual direction is viable. Up to 50 meters easy detection range. 700 KM wireless transmission Range. (Need to buy same brand wireless alarm panel or receiver) Automatic Shielding of the sunlight interference. Invalid reminder when the beams are not mounted well. Operating Range:-30°C to 70°C. Package: Each pair garden light wall will be packed into 3 packages, one for one pair garden light pole (with 8-beam photoelectric infrared detector inside), one for one pair LED lamp, one for base station. So, packing weight is 26kgs (much more than real weight) We can ship by sea or by air to air port if you can handle the import process at your side. Feel free to contact us.

Fences, gardens, swimming pools, golf courses etc. outdoor property large open land security equipment. Solar power LED light with wireless photoelectric beam sensor for intrusion detection and alarm. The garden light LED will light on automatically at night and light off at day time. The LED light can continue work for about 5 days at cloudy days or rainy days. The 8-beams photoelectric IR detector inside the garden light pole works 24 hours to keep illegal intrusion outside. If there is intrusion entering into the blocked area, it will trigger sound alarm and send wireless alarm signal to remote receiver. Solar-Power garden light wall is ideal security equipment and lighting device for garden, golf courses, swimming pools. The solar panel will charge the IR beam firstly, then charge the garden LED light. It can work for about 10 years of battery life time. If change battery, it can continue working. Technical Parameters Infrared Detection Range 50m Wireless Transmission Range 700m Beam Quantity 8 Wireless Frequency 433MHz FSK+FHSS Maximum Trigger Number In 24 Hours ≤200 times Working Voltage 3.3V Battery Type Chargeable LiFePO4 Battery Battery Capacity 6000mAh LED Power Consumption 1 W Infrared Wavelength 940nm±20nm Solar Panel Power Capability 2W Working Duration Solar charged for 8-12hours, Garden light can work 20hours continuously Barriers can work normally all the time no matter for rainy day or sunny days ) Working Temperature Range -30℃~70℃ Weight 17kg HB-T002A8：4.3kg Dimension 1400×φ150（mm） Solar&Wireless 8 Beam Barrier+Garden light Features: Battery Powered&Solar Charged,no need cables. Garden Lights turn on automatically at night and turn off automatically at day time. Multiple Detection Beams(to avoid false alarm--such as small pets). Dual direction is viable. Up to 50 meters easy detection range. 700 KM wireless transmission Range. (Need to buy same brand wireless alarm panel or receiver) Automatic Shielding of the sunlight interference. Invalid reminder when the beams are not mounted well. Operating Range:-30°C to 70°C. Package: Each pair garden light wall will be packed into 3 packages, one for one pair garden light pole (with 8-beam photoelectric infrared detector inside), one for one pair LED lamp, one for base station. So, packing weight is 26kgs (much more than real weight) We can ship by sea or by air to air port if you can handle the import process at your side. Feel free to contact us.

Fences, gardens, swimming pools, golf courses etc. outdoor property large open land security equipment. Solar power LED light with wireless photoelectric beam sensor for intrusion detection and alarm. The garden light LED will light on automatically at night and light off at day time. The LED light can continue work for about 5 days at cloudy days or rainy days. The 8-beams photoelectric IR detector inside the garden light pole works 24 hours to keep illegal intrusion outside. If there is intrusion entering into the blocked area, it will trigger sound alarm and send wireless alarm signal to remote receiver. Solar-Power garden light wall is ideal security equipment and lighting device for garden, golf courses, swimming pools. The solar panel will charge the IR beam firstly, then charge the garden LED light. It can work for about 10 years of battery life time. If change battery, it can continue working. Technical Parameters Infrared Detection Range 50m Wireless Transmission Range 700m Beam Quantity 8 Wireless Frequency 433MHz FSK+FHSS Maximum Trigger Number In 24 Hours ≤200 times Working Voltage 3.3V Battery Type Chargeable LiFePO4 Battery Battery Capacity 6000mAh LED Power Consumption 1 W Infrared Wavelength 940nm±20nm Solar Panel Power Capability 2W Working Duration Solar charged for 8-12hours, Garden light can work 20hours continuously Barriers can work normally all the time no matter for rainy day or sunny days ) Working Temperature Range -30℃~70℃ Weight 17kg HB-T002A8：4.3kg Dimension 1400×φ150（mm） Solar&Wireless 8 Beam Barrier+Garden light Features: Battery Powered&Solar Charged,no need cables. Garden Lights turn on automatically at night and turn off automatically at day time. Multiple Detection Beams(to avoid false alarm--such as small pets). Dual direction is viable. Up to 50 meters easy detection range. 700 KM wireless transmission Range. (Need to buy same brand wireless alarm panel or receiver) Automatic Shielding of the sunlight interference. Invalid reminder when the beams are not mounted well. Operating Range:-30°C to 70°C. Package: Each pair garden light wall will be packed into 3 packages, one for one pair garden light pole (with 8-beam photoelectric infrared detector inside), one for one pair LED lamp, one for base station. So, packing weight is 26kgs (much more than real weight) We can ship by sea or by air to air port if you can handle the import process at your side. Feel free to contact us.

Equipped a color LCD and a printer available for all information when alarms, errors or other operations occur. It finds that combustible gas leaks in industrial environment and daily living environment. When combustible gas alarm system detects that the concentration of combustible gas reaches the alarm value set by the alarm system, the combustible gas alarm will send out sound and light alarm signals to remind people to take safety measures such as evacuation, forced air exhaust and equipment shutdown. ▪ Color menu display ▪ Max 1 loop ▪ Networking Function ▪ Wall-mounted structure ,compact and exquisite ▪ Built-in printer ▪ Strong anti-interference capability Technical Specifications Mains supply: AC220V (3A),Voltage range: +10%～-15% Standby battery: 12V/7AH sealed lead acid battery *2 LCD screen size: 4.3-inch color LCD screen Operating Environment: Temperature: 0°C～+40°C;Relative Humidity: ≤95%, non-condensing Capacity: 255 addressable points Communication Interface: RS485、CAN、USB Dimension (L×W×H): 320mm×120mm×400mm TC5306
Combustible
Gas
Fire
Alarm
Control
Panel
(FACP)
is
the
new
generational
controller
with
powerful,
reliable
and
flexible
function.
The
control
panel
adopts
intelligent
loop
control
mode,
with
up
to
255
alarming
nodes
(addressable
detector)
in
each
loop.
The
loop
is
reliable
with
strong
anti-interference
capability,
convenient
for
commission
and
field
operation.

Equipped a color LCD and a printer available for all information when alarms, errors or other operations occur. It finds that combustible gas leaks in industrial environment and daily living environment. When combustible gas alarm system detects that the concentration of combustible gas reaches the alarm value set by the alarm system, the combustible gas alarm will send out sound and light alarm signals to remind people to take safety measures such as evacuation, forced air exhaust and equipment shutdown. ▪ Color menu display ▪ Max 1 loop ▪ Networking Function ▪ Wall-mounted structure ,compact and exquisite ▪ Built-in printer ▪ Strong anti-interference capability Technical Specifications Mains supply: AC220V (3A),Voltage range: +10%～-15% Standby battery: 12V/7AH sealed lead acid battery *2 LCD screen size: 4.3-inch color LCD screen Operating Environment: Temperature: 0°C～+40°C;Relative Humidity: ≤95%, non-condensing Capacity: 255 addressable points Communication Interface: RS485、CAN、USB Dimension (L×W×H): 320mm×120mm×400mm TC5306
Combustible
Gas
Fire
Alarm
Control
Panel
(FACP)
is
the
new
generational
controller
with
powerful,
reliable
and
flexible
function.
The
control
panel
adopts
intelligent
loop
control
mode,
with
up
to
255
alarming
nodes
(addressable
detector)
in
each
loop.
The
loop
is
reliable
with
strong
anti-interference
capability,
convenient
for
commission
and
field
operation.

Equipped a color LCD and a printer available for all information when alarms, errors or other operations occur. It finds that combustible gas leaks in industrial environment and daily living environment. When combustible gas alarm system detects that the concentration of combustible gas reaches the alarm value set by the alarm system, the combustible gas alarm will send out sound and light alarm signals to remind people to take safety measures such as evacuation, forced air exhaust and equipment shutdown. ▪ Color menu display ▪ Max 1 loop ▪ Networking Function ▪ Wall-mounted structure ,compact and exquisite ▪ Built-in printer ▪ Strong anti-interference capability Technical Specifications Mains supply: AC220V (3A),Voltage range: +10%～-15% Standby battery: 12V/7AH sealed lead acid battery *2 LCD screen size: 4.3-inch color LCD screen Operating Environment: Temperature: 0°C～+40°C;Relative Humidity: ≤95%, non-condensing Capacity: 255 addressable points Communication Interface: RS485、CAN、USB Dimension (L×W×H): 320mm×120mm×400mm TC5306
Combustible
Gas
Fire
Alarm
Control
Panel
(FACP)
is
the
new
generational
controller
with
powerful,
reliable
and
flexible
function.
The
control
panel
adopts
intelligent
loop
control
mode,
with
up
to
255
alarming
nodes
(addressable
detector)
in
each
loop.
The
loop
is
reliable
with
strong
anti-interference
capability,
convenient
for
commission
and
field
operation.

The gas alarm controller is used to observe, control and maintain the gas detector from a distance. Any operation inside a controller has to be performed by a professional. All operations must comply with local regulations and site procedures. The controller is wall-mounted controller, which can be installed directly on the wall of instrument room, duty room or workshop. The channel input of the controller is standard (4 ~ 20) mA signal, corresponding to the corresponding range, LCD screen displays the concentration of the gas channel and alarm information. *There are 2 channels, 4 channels and 8 channels for optional. One channel can equip one gas detector to show the corresponding measured value of gas concentration. The instrument can be widely used in petrochemical, artificial gas, metallurgy, iron and steel, coking, electric power and other combustible gas in various industries. It is the ideal controller to ensure property and personal safety. System parameters: Display: LED screen Signal input: 1-8 channels 4-20mA standard current loop input, supporting 2-wire and 3-wire systems Working voltage: AC220V±15%,50Hz Using environment: Temperature: - 10 ℃, 50 ℃ Relative humidity: 10%~90%RH (non-condensing) Atmospheric pressure: 86kpa - 106kpa Response time < 30s Alarm volume > 75dB Error ≤±3%FS Dimension: 270mm*200mm*72mm (height*width*thickness) Extended functions: 4-20mA signal output/per channel Relay signal output/per channel 485 output/per channel (standard Modbus RTU protocol), can be connected to a computer for monitoring

The gas alarm controller is used to observe, control and maintain the gas detector from a distance. Any operation inside a controller has to be performed by a professional. All operations must comply with local regulations and site procedures. The controller is wall-mounted controller, which can be installed directly on the wall of instrument room, duty room or workshop. The channel input of the controller is standard (4 ~ 20) mA signal, corresponding to the corresponding range, LCD screen displays the concentration of the gas channel and alarm information. *There are 2 channels, 4 channels and 8 channels for optional. One channel can equip one gas detector to show the corresponding measured value of gas concentration. The instrument can be widely used in petrochemical, artificial gas, metallurgy, iron and steel, coking, electric power and other combustible gas in various industries. It is the ideal controller to ensure property and personal safety. System parameters: Display: LED screen Signal input: 1-8 channels 4-20mA standard current loop input, supporting 2-wire and 3-wire systems Working voltage: AC220V±15%,50Hz Using environment: Temperature: - 10 ℃, 50 ℃ Relative humidity: 10%~90%RH (non-condensing) Atmospheric pressure: 86kpa - 106kpa Response time < 30s Alarm volume > 75dB Error ≤±3%FS Dimension: 270mm*200mm*72mm (height*width*thickness) Extended functions: 4-20mA signal output/per channel Relay signal output/per channel 485 output/per channel (standard Modbus RTU protocol), can be connected to a computer for monitoring

The gas alarm controller is used to observe, control and maintain the gas detector from a distance. Any operation inside a controller has to be performed by a professional. All operations must comply with local regulations and site procedures. The controller is wall-mounted controller, which can be installed directly on the wall of instrument room, duty room or workshop. The channel input of the controller is standard (4 ~ 20) mA signal, corresponding to the corresponding range, LCD screen displays the concentration of the gas channel and alarm information. *There are 2 channels, 4 channels and 8 channels for optional. One channel can equip one gas detector to show the corresponding measured value of gas concentration. The instrument can be widely used in petrochemical, artificial gas, metallurgy, iron and steel, coking, electric power and other combustible gas in various industries. It is the ideal controller to ensure property and personal safety. System parameters: Display: LED screen Signal input: 1-8 channels 4-20mA standard current loop input, supporting 2-wire and 3-wire systems Working voltage: AC220V±15%,50Hz Using environment: Temperature: - 10 ℃, 50 ℃ Relative humidity: 10%~90%RH (non-condensing) Atmospheric pressure: 86kpa - 106kpa Response time < 30s Alarm volume > 75dB Error ≤±3%FS Dimension: 270mm*200mm*72mm (height*width*thickness) Extended functions: 4-20mA signal output/per channel Relay signal output/per channel 485 output/per channel (standard Modbus RTU protocol), can be connected to a computer for monitoring

Conventional Maintenance Switch For Gas Extinguisher System This MAINTENANCE panel is a key switch, which disconnects actuation circuits in the system to prevent accidental discharge during maintenance operations. Two “LEDS” indicate “SYSTEM ARMED” and “SYSTEM INACTIVE”. When the key is inserted and turned towards “SYSTEM INACTIVE”, the red LED illuminates and the green LED indicating “SYSTEM ARMED” turns off. The key can only be removed in the “SYSTEM ARMED” position. This panel is also available with the key removable in both the “ARMED” and the “INACTIVE” positions. The information is silk-screened on a two-gang stainless plate. Switch rated at 5A 250VAC， the DC rating is 5A up to 30VDC. LEDS rated at 10mA each for a total current draw of 20mA. Video guidance to instruct how to install gas fire extinguishing fire alarm and fire automatic fighting system

Conventional Maintenance Switch For Gas Extinguisher System This MAINTENANCE panel is a key switch, which disconnects actuation circuits in the system to prevent accidental discharge during maintenance operations. Two “LEDS” indicate “SYSTEM ARMED” and “SYSTEM INACTIVE”. When the key is inserted and turned towards “SYSTEM INACTIVE”, the red LED illuminates and the green LED indicating “SYSTEM ARMED” turns off. The key can only be removed in the “SYSTEM ARMED” position. This panel is also available with the key removable in both the “ARMED” and the “INACTIVE” positions. The information is silk-screened on a two-gang stainless plate. Switch rated at 5A 250VAC， the DC rating is 5A up to 30VDC. LEDS rated at 10mA each for a total current draw of 20mA. Video guidance to instruct how to install gas fire extinguishing fire alarm and fire automatic fighting system

Conventional Maintenance Switch For Gas Extinguisher System This MAINTENANCE panel is a key switch, which disconnects actuation circuits in the system to prevent accidental discharge during maintenance operations. Two “LEDS” indicate “SYSTEM ARMED” and “SYSTEM INACTIVE”. When the key is inserted and turned towards “SYSTEM INACTIVE”, the red LED illuminates and the green LED indicating “SYSTEM ARMED” turns off. The key can only be removed in the “SYSTEM ARMED” position. This panel is also available with the key removable in both the “ARMED” and the “INACTIVE” positions. The information is silk-screened on a two-gang stainless plate. Switch rated at 5A 250VAC， the DC rating is 5A up to 30VDC. LEDS rated at 10mA each for a total current draw of 20mA. Video guidance to instruct how to install gas fire extinguishing fire alarm and fire automatic fighting system